NH22-150 7105G - Datasheet Archive

 

1-800-383-7323 USA/CAN www.energizer.com ENERGIZER NH22-150 9V Specifications Classification: Chemical System: Designation:

 

PRODUCT DATASHEET 1-800-383-7323 USA/CAN www.energizer.com ENERGIZER NH22-150 NH22-150 9V Specifications Classification: Chemical System: Designation: Nominal Voltage: Rated Capacity: Typical Weight: Typical Volume: Terminals: Jacket: Industry Standard Dimensions mm (inches) Rechargeable Nickel-Metal Hydride (NiMH) ANSI-7.2H5 7.2 Volts 150 mAh* at 21°C (70°F) 42.0 grams (1.5 oz.) 22.0 cubic centimeters (1.3 cubic inch) Snap Plastic * Based on 30 mA (0.2C rate) continuous discharge to 1.0 volts. 17.50 (0.689) 15.50 (0.610) 12.95 (0.510) 12.45 (0.490) 26.50 (1.043) Internal Resistance: 24.50 (0.965) The internal resistance of the cell varies with state of charge, as follows: Cell 1/2 Discharged Cell Charged 1000 milliohms 1500 milliohms (tolerance of ±20% applies to above values) 48.50 (1.909) 46.40 (1.827) Maximum 46.50 (1.831) AC Impedance (no load): The impedance of the charged cell varies with frequency, as follows: Discharge Characteristics Frequency (Hz) Typical Performance at 21ºC (70ºF) Cell Voltage 8.0 1000 7.5 15 mA (0.1C) 7.0 30 mA (0.2C) 6.5 6.0 Above values based on AC current set at 1.0 ampere Value tolerances are ±20%. 5.5 0 3 6 9 12 Hours of Discharge Cell Voltage Operating and Storage Temperatures: To maintain maximum performance, observe the following general guidelines regarding environmental conditions: 8.0 7.5 7.0 150 mA (1.0C) 6.0 5.5 0.0 0.5 Charge: Discharge: Storage: Humidity: 75 mA (0.5C) 6.5 1.0 Impedance (milliohms) (charged cell) 950 1.5 2.0 0ºC to 40ºC (32ºF to 104ºF) 0ºC to 50ºC (32ºF to 122ºF) -20ºC to 30ºC (-4ºF to 86ºF) 65±20% NOTE: Operating at extreme temperatures, will significantly impact battery cycle life. Hours of Discharge Important Notice This data sheet contains typical information specific to products manufactured at the time of its publication. ©Energizer Holdings, Inc. - Contents herein do not constitute a warranty. Form No. EBC - 7105G 7105G Page 1 of 1