MUR420 DO-201AD 2002/95/EC 2002/96/EC J-STD-002B JESD22-B102D MUR420-E3/54

Vishay General Semiconductor Ultrafast Plastic Rectifier FEATURES · Glass passivated chip junction · Ultrafast

MUR420 MUR420 Vishay General Semiconductor Ultrafast Plastic Rectifier FEATURES · Glass passivated chip junction · Ultrafast reverse recovery time · Low forward voltage drop · Low leakage current · Low switching losses, high efficiency · High forward surge capability DO-201AD DO-201AD · Solder Dip 260 °C, 40 seconds · Component in accordance to RoHS 2002/95/EC 2002/95/EC and WEEE 2002/96/EC 2002/96/EC MAJOR RATINGS AND CHARACTERISTICS IF(AV) 4.0 A VRRM 200 V IFSM 150 A trr 25 ns VF 0.710 V Tj max. 175 °C TYPICAL APPLICATIONS For use in high frequency rectification and freewheeling application in switching mode converters and inverters for consumer, computer and telecommunication. MECHANICAL DATA Case: DO-201AD DO-201AD Epoxy meets UL 94V-0 flammability rating Terminals: Matte tin plated leads, solderable per J-STD-002B J-STD-002B and JESD22-B102D JESD22-B102D E3 suffix for commercial grade Polarity: Color band denotes cathode end MAXIMUM RATINGS (TA = 25 °C unless otherwise noted) PARAMETER SYMBOL VALUE UNIT Maximum repetitive peak reverse voltage VRRM 200 V Working peak reverse voltage VRWM 200 V Maximum DC blocking voltage VDC 200 V Maximum average forward rectified current at TA = 80 °C (see Fig. 1) IF(AV) 4.0 A Peak forward surge current 8.3 ms single half sine-wave superimposed on rated load IFSM 150 A TJ, TSTG - 65 to + 175 °C Operating junction and storage temperature range Document Number: 88685 Revision: 02-Jul-07 www.vishay.com 1 MUR420 MUR420 Vishay General Semiconductor ELECTRICAL CHARACTERISTICS (TA = 25 °C unless otherwise noted) PARAMETER SYMBOL VALUE UNIT Maximum instantaneous forward voltage (1) at 3.0 A, TJ = 150 °C at 3.0 A, TJ = 25 °C at 4.0 A, TJ = 25 °C TEST CONDITIONS VF 0.710 0.875 0.890 V Maximum instantaneous reverse current at rated DC blocking voltage (1) TJ = 25 °C TJ = 150 °C IR 5.0 150 µA Maximum reverse recovery time at IF = 0.5 A, IR = 1.0 A, Irr = 0.25 A trr 25 ns Maximum reverse recovery time at IF = 1.0 A, di/dt = 50 A/µs, VR = 30 V, Irr = 10 % IRM trr 35 ns Maximum forward recovery time IF = 1.0 A, di/dt = 100 A/µs, Rec. to 1.0 V tfr 25 ns Note: (1) Pulse test: tp = 300 µs, duty cycle 2 % THERMAL CHARACTERISTICS (TA = 25 °C unless otherwise noted) PARAMETER SYMBOL VALUE UNIT RJA Typical thermal resistance junction to ambient (1) 28 °C/W Note: (1) Lead length = 1/2" on P.C. board with 1/2" x 1/2" copper surface ORDERING INFORMATION (Example) PREFERRED P/N UNIT WEIGHT (g) PREFERRED PACKAGE CODE BASE QUANTITY DELIVERY MODE MUR420-E3/54 MUR420-E3/54 1.138 54 1400 13" Diameter Paper Tape & Reel MUR420-E3/73 MUR420-E3/73 1.138 73 1000 Ammo Pack Packaging RATINGS AND CHARACTERISTICS CURVES (TA = 25 °C unless otherwise noted) 150 Peak Forward Surge Current (A) Average Forward Current (A) 8.0 6.0 4.0 2.0 0 125 100 75 50 25 0 25 0 50 75 100 125 150 Ambient Temperature (°C) Figure 1. Forward Current Derating Curve www.vishay.com 2 175 1 10 100 Number of Cycles at 60 Hz Figure 2. Maximum Non-Repetitive Peak Forward Surge Current Document Number: 88685 Revision: 02-Jul-07 MUR420 MUR420 Vishay General Semiconductor 1000 Instantaneous Forward Current (A) 100 Junction Capacitance (pF) TJ = 175 °C 10 TJ = 100 °C 1 TJ = 25 °C 0.1 0.01 0.2 0.4 0.6 0.8 1.0 1.2 100 10 1 0.1 1.4 Instantaneous Forward Voltage (V) 1 10 100 Reverse Voltage (V) Figure 3. Typical Instantaneous Forward Characteristics Figure 5. Typical Junction Capacitance Instantaneous Reverse Leakage Current (µA) 1000 TJ = 175 °C 100 10 TJ = 100 °C 1 0.1 TJ = 25 °C 0.01 0.001 0 20 40 60 80 100 Percent of Rated Peak Reverse Voltage (%) Figure 4. Typical Reverse Leakage Characteristics PACKAGE OUTLINE DIMENSIONS in inches (millimeters) DO-201AD DO-201AD 1.0 (25.4) MIN. 0.210 (5.3) 0.190 (4.8) DIA. 0.375 (9.5) 0.285 (7.2) 1.0 (25.4) MIN. 0.052 (1.32) 0.048 (1.22) DIA. Document Number: 88685 Revision: 02-Jul-07 www.vishay.com 3 Legal Disclaimer Notice Vishay Notice Specifications of the products displayed herein are subject to change without notice. Vishay Intertechnology, Inc., or anyone on its behalf, assumes no responsibility or liability for any errors or inaccuracies. Information contained herein is intended to provide a product description only. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document. Except as provided in Vishay's terms and conditions of sale for such products, Vishay assumes no liability whatsoever, and disclaims any express or implied warranty, relating to sale and/or use of Vishay products including liability or warranties relating to fitness for a particular purpose, merchantability, or infringement of any patent, copyright, or other intellectual property right. The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications. Customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify Vishay for any damages resulting from such improper use or sale. Document Number: 91000 Revision: 08-Apr-05 www.vishay.com 1