MTSM6300-BL-A EIA-481A - Datasheet Archive

Tollfree:1.800.984.5337 Phone:1.518.956.2980 Fax:1.518.785.4725 Http://www.marktechopto.com SPECIFICATION PART NO. :

3Northway Lane North Latham,New York 12110. Tollfree:1.800.984.5337 Phone:1.518.956.2980 Fax:1.518.785.4725 Http://www.marktechopto.com SPECIFICATION PART NO. : MTSM6300-BL-A MTSM6300-BL-A 0603 SMD CHIP LED ATTENTION OBSERVE PRECAUTION FOR HANDLING ELECTRO STATIC SENSITIVE DEVICES 0603 SMD CHIP LED MTSM6300-BL-A MTSM6300-BL-A Package Dimensions CATHODE 0.60 0.4 0.4 1.0 1.6 RESIN TOP VIEW 0.18±0.03 BOTTOM VIEW Notes: 1. All dimensions are in mm. 2. Tolerance is ±0.1mm unless otherwise noted. Description LED Chip Part No. MTSM6300-BL-A MTSM6300-BL-A Material Emitting Color InGaN/Sapphire Blue VER.: 01 Lens Color Water Clear Date: 2007/10/04 Page: 1/6 0603 SMD CHIP LED MTSM6300-BL-A MTSM6300-BL-A Absolute Maximum Ratings at Ta=25 Parameter Symbol Rating Unit Power Dissipation PD 120 mW Reverse Voltage VR 5 V D.C. Forward Current If 30 mA If(Peak) 80 mA Operating Temperature Range Topr. -30 to +80 Storage Temperature Range Tstg. -40 to +85 Soldering Temperature. Tsol. Electric Static Discharge ESD Peak Current(1/10Duty Cycle,0.1ms Pulse Width.) Reflow Soldering:260 for 10 sec. 6000 V Electrical and Optical Characteristics: Parameter Symbol Condition Min. Typ. Luminous Intensity IV If=20mA 36.7 70 Forward Voltage Vf If=20mA 3.2 Peak Wavelength P If=20mA - nm Dominant Wavelength D If=20mA 465 nm Reverse Current Ir Vr=5V Viewing Angle 21/2 If=20mA 130 deg If=20mA 35 nm Spectrum Line Halfwidth Max. Unit mcd 4.0 50 V µA Notes:1.The datas tested by IS tester. 2. Customer's special requirements are also welcome. VER.: 01 Date: 2007/10/04 Page: 2/6 0603 SMD CHIP LED MTSM6300-BL-A MTSM6300-BL-A Typical Electrical/Optical Characteristic Curves (25 Ambient Temperature Unless Otherwise Noted) 120 Relative Luminous Intensity Forward Current IF(mA) 50 40 30 20 10 2.8 3.0 3.2 3.4 3.6 Forward Voltage (V) 100 80 60 40 20 0 3.8 15 20 25 30 35 40 Forward Current (mA) RELATIVE INTENSITY VS. FORWARD CURRENT FORWARD CURRENT VS.APPLIED VOLTAGE 10 50 40 30 Relative Intensity Forward Current IF(mA) 10 5 20 10 0 20 40 60 Temperature() 80 1.0 0.5 0.2 0.1 -20 100 0 20 40 60 80 100 Temperature() RELATIVE INTENSITY VS. AMBIENT TEMPERATURE FORWARD CURRENT VS. AMBIENT TEMPERATURE 0° 10° 20° 30° 40° 1.0 0.9 50° 0.8 60° 70° 80° 90° 0.7 0.5 0.3 0.1 0.2 0.4 0.6 Radiation Diagram VER.: 01 Date: 2007/10/04 Page: 3/6 0603 SMD CHIP LED MTSM6300-BL-A MTSM6300-BL-A Precautions in Use: Storage Recommend storage environment Temperature 530 (41°F86°F) Humidity 60% RH Max. Use within 7 days after opening of sealed vapor/ESD barrier bags. If the moisture absorbent material (silica gel) has faded away or the LEDs have exceeded the storage time, baking treatment should be performed using the following conditions. Baking treatment : 60±5 for 24 hours. Fold the opened bag firmly and keep in dry environment. Soldering Reflow Soldering Recommend use of upper and lower heater type reflow furnace. 260 Max for up to 10 seconds, one time only. Pre-heat is 150 Max for up to 2 minutes Max. In case of screen-printing, keep metal mask thickness between 0.2mm and 0.3mm. Cleaning Surface condition of this device may change when organic solvents such as trichloroethylene or acetone were applied. Avoid using organic solvent. Recommend ultrasonic method 300W Max. Packaging EIA-481A EIA-481A standard package. In 8mm tape on 4000 pcs diameter reels sealed in vapor/ESD barrier bags. Reflow Temp/Time: 10 SEC. Temperature 260°CMAX. 140160 4°C/SEC. 4°C/SEC. 2 minutes Max. Time VER.: 01 Date: 2007/10/04 Page: 4/6