MSGK60/IC SDSA0882 XX000 XX001 XX010 XX011 XX100 XX110 XX111 100KV

www.SunLED.com MSGK60/IC 5X8 DOT MATRIX SERIAL INPUT DOT ADDRESSABLE INTELLIGENT DISPLAY DEVICES Notes: 1. All dimensions are in

Part Number: www.SunLED.com MSGK60/IC MSGK60/IC 5X8 DOT MATRIX SERIAL INPUT DOT ADDRESSABLE INTELLIGENT DISPLAY DEVICES Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ± 0.25(0.01") unless otherwise noted. Features 4 DIGITS, 5*8 DOT MATRIX. 8 BITS SERIAL DATA INPUT REGISTER AND LATCH REGISTER. 10*14 BITS STATIC RAM. INTERNAL OSCILLATOR INCLUDED. THE RESET INPUT WILL CLEAR THE MULTIPLEX COUNTER, ALL REGISTERS AND USER RAM. THE SOFTWARE RESET WILL CLEAR THE ADDRESS REGISTER AND USER RAM. BOTH RESETS MAKE THE DISPLSY BE BLANK. INTERNAL SOFTWARE BRIGHTNESS CONTROL=0%, 6.6%, 13%, 20%, 27%, 40%, 53%, 100%. THERE ARE FOUR 100% BRIGHTNESS CONTROL PINS. V1G AND V2G CONTROL THE BRIGHTNESS FOR ANODE DRIVERS G0-G4 WHILE V1Y AND V2Y CONTROL Y0-Y4. BUILT-IN DECODERS MULTIPLEXERS AND LED DRIVERS. HARDWARE/SOFTWARE CLEAR FUNCTIONS. GRAY FACE, WHITE DOT SEGMENT. RoHS COMPLIANT. Description THE ON-BOARD CMOS HAS A 10*14 BIT RAM, ONE BIT ASSOCIATED WITH ONE LED, EACH TO GENERATE USER DEFINED CHARACTERS. THE PRODUCT IS DESIGNED FOR WORK WITH THE SERIAL PORT OF MOST COMMON MICROPROCESSORS. DATA IS TRANSFERRED INTO THE DISPLSY THROUGH AND SERIAL DATA INPUT (DATA), CLOCKED BYTHE SERIAL DATA CLOCK (SDCLK), AND ENABLED BY THE LOAD INPUT DOAD. Published Date : AUG 16,2005 Drawing No : SDSA0882 SDSA0882 V1 Checked : Enid Deng P.1/15 Part Number: www.SunLED.com MSGK60/IC MSGK60/IC 5X8 DOT MATRIX SERIAL INPUT DOT ADDRESSABLE INTELLIGENT DISPLAY DEVICES TIMING CHART AND TIMING CONDITIONS Figure 1. BASIC SEQUENCE Figure 2. TIMING CONDITIONS. VCC=+5V Ta=+25°C, UNLESS OTHERWISE SPECIFIED ITEM CHARACTERISTIC SYMBOL VALUE UNIT a RESET ACTIVE TIME TRST 600 nS b DATA SETUP TIME TDS 40 nS c DATA HOLD TIME TDH 20 nS d SERIAL DATA CLOCK PULSE WIDTH TCLK-PUL 1 uS e SERIAL DATA COLCK PERIOD TIME TCLK-PRD 2 uS f LOAD SETUP TIME TLDS 40 nS g LOAD HOLD TIME TLDH 0 nS h TIME BETWEEN LOAD TBL 600 nS V1 Checked : Enid Deng Published Date : AUG 16,2005 Drawing No : SDSA0882 SDSA0882 P.2/15 Part Number: www.SunLED.com MSGK60/IC MSGK60/IC 5X8 DOT MATRIX SERIAL INPUT DOT ADDRESSABLE INTELLIGENT DISPLAY DEVICES Figure 3. Top view - character Maximum Ratings DC Supply Voltage. 0.5 to +5.5 Vdc Input Voltage Levels Relative To Ground . 0.5 to Vcc +0.5 Vdc Operating Temperature. 0 ° C to +45 ° C Maximum Solder Temperature 0.063" Below Seating Plane, T10cm). Good digital grounds (pin 4) and power supply decoupling (pin 2) will insure that Icc (