MIL-PRF-83536 SO-1049-8309/8987 MIL-STD-202 RC-RP800060-5 RC-RP920060-1 - Datasheet Archive

 

ENGINEERING DATA SHEET RELAY - NONLATCH 2 PDT, 12 AMPS All welded construction Contact arrangement 2 PDT Qualified at 10 Amps to

 

SERIES J ENGINEERING DATA SHEET RELAY - NONLATCH 2 PDT, 12 AMPS All welded construction Contact arrangement 2 PDT Qualified at 10 Amps to MIL-PRF-83536 MIL-PRF-83536 PRINCIPLE TECHNICAL CHARACTERISTICS Contacts rated at 28 Vdc; 115 Vac, 400 Hz, 1 phase and 115/200 Vac, 400 Hz, 3 phases Weight 0.088lb max Dimensions of case 1.01in x .51in x 1.00in Special models available upon request. Hermetically sealed, corrosion resistant metal can. APPLICABLE SOCKET: SO-1049-8309/8987 SO-1049-8309/8987 SO-SSL CONTACT ELECTRICAL CHARACTERISTICS Contact rating per pole and load type [1] Load current in Amps @28 Vdc @115 Vac 400 Hz @115/200 Vac, 400 Hz, 3Ø @115/200 Vac, 60 Hz, 3Ø [2] 12 8 4 2 40 50 12 8 4 2 60 80 12 8 4 2 60 80 2.5 2.5 2 N/A N/A Resistive Inductive [3] Motor Lamp Overload Rupture LEACH ® INTERNATIONAL North America 6900 Orangethorpe Ave. P.O. Box 5032 Buena Park, CA 90622 USA Europe, SA 2 Rue Goethe 57430 Sarralbe France Asia-Pacific Ltd. 20/F Shing Hing Commercial Bldg. 21-27 Wing Kut Street Central, Hong Kong www.leachintl.com Tel: (01) 714-736-7599 Fax: (01) 714-670-1145 Tel: (33) 3 87 97 98 97 Fax: (33) 3 87 97 84 04 Tel: (852) 2 191 2886 Fax: (852) 2 389 5803 Solutions for Power Switching and Control Date of issue: 6/02 - 125 - Page 1 of 4 COIL CHARACTERISTICS (Vdc) SERIES J CODE A B C M N [4] R [4] V [4] Nominal operating voltage 28 12 6 48 28 12 6 Maximum operating voltage 29 14.5 7.3 50 29 14.5 7.3 - Cold coil at +125° C 18 9 4.5 36 18 9 4.5 - During high temp test at +125° C 19.8 9.9 5 38 19.8 9.9 5 - During continuous current test at +125° C 22.5 11.25 5.7 42 22.5 11.25 5.7 Maximum drop-out voltage 7 4.5 2.5 14 7 4.5 2.5 Coil resistance ±10% at +25° C, except types "C" and "V" +20%, -10% 320 80 20 1000 320 80 20 Maximum pickup voltage GENERAL CHARACTERISTICS Temperature range -70°C to +125°C Minimum operating cycles (life) at rated load 100,000 Minimum operating cycles (life) at 25% rated load 400,000 Dielectric Strength at sea level - All circuits to ground and circuit to circuit 1250 Vrms Dielectric Strength at sea level - Coil to ground 1000 Vrms Dielectric Strength at altitude 80,000 ft 500 Vrms [5] Insulation resistance - Initial (500 Vdc) 100 M min Insulation resistance - After environmental tests (500 Vdc) 50 M min Sinusoidal vibrations (A, D and J mounting) 0.12DA / 10 to 70 Hz 30 g / 70 to 3000 Hz Sinusoidal vibrations (G mounting) 0.12DA / 10 to 57 Hz 20g /57 to 3000 Hz Random vibrations - Applicable specification MIL-STD-202 MIL-STD-202 - Method 214 - Test condition - A, D and J Mounting 1G (0.4g2/Hz, 50 to 2000 Hz) - Test condition - G Mounting (E in Track) 1E (0.2g2/Hz, 50 to 2000 Hz) - Duration 15 minutes each plane Shocks (A, D and J mounting) 200 g / 6 ms Shocks (G mounting) 100 g / 6 ms Maximum contact opening time under vibrations and shocks 10 µs Operate time at nominal voltage@25°C 10 ms max Release time at nominal voltage@25°C 10 ms max Contact make bounce at nominal voltage@25°C 1 ms max Contact release break bounce at nominal voltage@25°C 0.1 ms max [6] Weight maximum 0.088lb Unless otherwise noted, the specified temperature range applies to all relay characteristics. Date of issue: 6/02 - 126 - Page 2 of 4 NOTES SERIES J [1] Standard Intermediate current test applicable. [2] 60 Hz load life, 10,000 cycles. [3] Inductive load life, 20,000 cycles. [4] "N" R & V coils have back EMF suppression to 42 volts maximum. [5] 500 Vrms with silicone gasket compressed, 350 Vrms all other conditions. [6] Applicable to suppressed coils only. 7. Applicable military specification: MIL-PRF-83536 MIL-PRF-83536. 8. Special models available: Dry circuit, established reliability testing, etc. 9. Time current relay characteristics per MIL-PRF-83536 MIL-PRF-83536. 10. Relay will not operate, but will not be damaged by application of reverse polarity to coil. NUMBERING SYSTEM J A 1 A Basic series designation_| | | | 1-Mounting Style (A,D,G,J)_| | | 2-Terminal Types (1,2,4)_| | 3-Coil Voltage see coil characteristics (A,B,C,M,N,R or V)_| MOUNTING STYLES Date of issue: 6/02 - 127 - Page 3 of 4 TERMINAL TYPES SERIES J Standard Tolerance: ± .010 1. Insulator P/N RC-RP800060-5 RC-RP800060-5 or RC-RP920060-1 RC-RP920060-1 available from Robison Electronics, San Luis Obispo, CA. STANDARD TOL: ±.010 Date of issue: 6/02 - 128 - Page 4 of 4 SO-1049-8309/8987 SO-1049-8309/8987 ENGINEERING DATA SHEET RELAY SOCKET 12 AMP BASIC SOCKET SERIES DESIGNATION FOR: Series J DESIGNED TO THE STANDARDS AND REQUIREMENTS OF: MIL-S-12883/41 MIL-S-12883/41 GENERAL CHARACTERISTICS 1. Supplied with mounting hardware and No. 16 contacts, No. 16 crimp (see socket drawing illustration SO-1049-8309 SO-1049-8309); No. 16 contacts, No. 20 crimp for SO-1049-8987 SO-1049-8987 (not illustrated) 2. Standard tolerances .xx ±.01; xxx ±.005 3. Weight .073 lb. max 4. Temperature range -70° C to +125° C LEACH ® INTERNATIONAL North America 6900 Orangethorpe Ave. P.O. Box 5032 Buena Park, CA 90622 USA Europe, SA 2 Rue Goethe 57430 Sarralbe France Asia-Pacific Ltd. 20/F Shing Hing Commercial Bldg. 21-27 Wing Kut Street Central, Hong Kong www.leachintl.com Tel: (01) 714-736-7599 Fax: (01) 714-670-1145 Tel: (33) 3 87 97 98 97 Fax: (33) 3 87 97 84 04 Tel: (852) 2 191 2886 Fax: (852) 2 389 5803 Solutions for Power Switching and Control Date of issue: 6/02 - 11 - Page 1 of 1 SO-SSL ENGINEERING DATA SHEET SOCKET FOR 2 OR 4 POLE 10 AMP SNAP AND LOCK SOCKET SERIES DESIGNATION FOR: SERIES J, JA, K, KA, KL, TDX DESIGNED TO THE STANDARDS AND REQUIREMENTS OF: MIL-PRF-12883/41 MIL-PRF-12883/41 M83536 M83536, M83726 M83726 and MS27709 MS27709 MIL-PRF-12883/40 MIL-PRF-12883/40 M83536 M83536 2-pole, 10A relays Mates with 4-pole, 10A relays Mates with FEATURES 2 POLE Low profile Bottom panel mount Snaps into panel Other models available MATERIALS Socket body Grommet Hardware Contacts Contact retainers Polyetherimide per MIL-P-46184 MIL-P-46184 Silicone rubber per ZZ-R-765 ZZ-R-765 Stainless Steel Copper alloy, hard gold plated per MIL-G-45204 MIL-G-45204 Beryllium copper 4 POLE GENERAL CHARACTERISTICS Insulation resistance 1000 M min. Dielectric withstanding voltage 1500 VRMS sea level; 500 VRMS at 80,000 ft Weight 15.3g max. Temperature range -65°C to +125°C Vibration MIL-STD-202 MIL-STD-202, Method 204, Test Condition G Shock MIL-STD-202 MIL-STD-202, Method 213, Test Condition C This socket is designed to snap and lock into a panel to reduce hardware requirement and mounting time. Contacts and hardware are provided disassembled in a plastic bag. Standard tolerances are .xx=±.01; .xxx=±.005 unless otherwise noted. LEACH ® INTERNATIONAL North America 6900 Orangethorpe Ave. P.O. Box 5032 Buena Park, CA 90622 USA Europe, SA 2 Rue Goethe 57430 Sarralbe France Asia-Pacific Ltd. 20/F Shing Hing Commercial Bldg. 21-27 Wing Kut Street Central, Hong Kong www.leachintl.com Tel: (01) 714-736-7599 Fax: (01) 714-670-1145 Tel: (33) 3 87 97 98 97 Fax: (33) 3 87 97 84 04 Tel: (852) 2 191 2886 Fax: (852) 2 389 5803 Solutions for Power Switching and Control Date of issue: 6/02 - 35 - Page 1 of 4 SOCKET DIMENSIONS SO-SSL (2 POLE) TERMINAL LAYOUT Date of issue: 6/02 - 36 - Page 2 of 4 SOCKET DIMENSIONS SO-SSL (4 POLE) TERMINAL LAYOUT Date of issue: 6/02 - 37 - Page 3 of 4 SOCKET NUMBERING SYSTEM SERIES SSL SO SSL KA 001 1-Basic socket designation_| | | ||| 2-Body style (short snap lock)_| | ||| 3-Mating relay (J, JA, K, KA, KL, TDX)_| ||| 4-Polarization (see terminal layout)_||| 5-Hardware (0=less hardware, 1=with hardware)_|| 6-Contacts (0=less contacts, 1=with contacts)_| Date of issue: 6/02 - 38 - Page 4 of 4