MIC2289 F/16V MIC2289-15BML M9999-071007 MIC2289-24YD6 MIC2289-15YML

White LED Driver Internal Schottky Diode and OVP General Description Features The MIC2289 is a PWM (pulse width modulated),

MIC2289 MIC2289 White LED Driver Internal Schottky Diode and OVP General Description Features The MIC2289 MIC2289 is a PWM (pulse width modulated), boostswitching regulator that is optimized for constant-current white LED driver applications. The MIC2289 MIC2289 features an internal Schottky diode and three levels of output overvoltage protection providing a small size and efficient DC/DC solution that requires only four external components. To optimize efficiency, the feedback voltage is set to only 95mV. This reduces power dissipation in the current set resistor and allows the lowest total output voltage, hence minimal current draw from the battery. The MIC2289 MIC2289 implements a constant frequency 1.2MHz PWM control scheme. The high frequency, PWM operation saves board space by reducing external component sizes. The added benefit of the constant frequency PWM scheme in caparison to variable frequency is much lower noise and input ripple injected to the input power source. The MIC2289 MIC2289 clamps the output voltage in case of open LED conditions, protecting itself and the output capacitor. The MIC2289 MIC2289 is available with three output OVP options of 15V, 24V, and 34V. The different OVP options allows the use of the smallest possible output capacitor with the appropriate voltage rating for a given application. The MIC2289 MIC2289 is available in low profile 6-pin Thin SOT-23 and 8-pin 2mm × 2mm MLF® package options. The MIC2289 MIC2289 has a junction temperature range of 40°C to +125°C. Data sheets and support documentation can be found on Micrel's web site at: www.micrel.com. · · · · · · · · · · · · · 2.5V to 10V input voltage Output voltage up to 34V Internal Schottky diode 15V, 24V, 34V output OVP options 1.2 MHz PWM operation Over 500mA switch current 95mV feedback voltage