MI-200 MIL-STD-704D/E DOD-STD-1399A MIL-STD-810 MIL-HDBK-217F 704D/E P-4855-1A

TM Military DC-DC Converters 50 to 100W Features Current limit Inputs: 28Vdc per MIL-STD-704D/E 155Vdc per DOD-STD-1399A 270Vdc

MI-200 MI-200 TM Military DC-DC Converters 50 to 100W Features Current limit Inputs: 28Vdc per MIL-STD-704D/E MIL-STD-704D/E 155Vdc per DOD-STD-1399A DOD-STD-1399A 270Vdc per MIL-STD-704D/E MIL-STD-704D/E OVP and thermal shutdown Single output: 1 95Vdc Power boosters for higher power outputs Up to 23W/in3 ZVS/ZCS power architecture MIL-STD-810 MIL-STD-810 environments Low noise FM control Product Highlights Up to 90% efficiency The MI-Series is designed for military applications and is based on Vicor's 1st Generation family of zero-current/zero-voltage-switching, component level DC-DC converters. Operating at frequencies in excess of 1MHz, the MI-Series offers state-of-the-art performance in terms of power density, efficiency, noise, ease of use and reliability. Remote sense Size: 4.6" x 2.4" x 0.5" (116,8 x 61,0 x 12,7mm) All units are manufactured in ISO 9001-registered facilities. Full epoxy encapsulation in Vicor's industry standard package enables the MI-Series to meet MIL-STD-810 MIL-STD-810 environmental requirements for humidity, fungus, salt, fog, explosive atmosphere, acceleration, vibration and shock. (See page 32.) Standard features such as wide output trimming/programming, current limiting, remote sense, output inhibit and latching OVP and OTP combine to offer a high degree of protection, versatility and reliability for military power systems. Converter/Booster Specifications (At TBP = 25°C, nominal line and 75% load, unless otherwise specified) PARAMETER Input Characteristics Input voltage range No load power dissipation MIN Output Characteristics Set point accuracy Load/line regulation 0.5 0.05 0.2 0.01 1.0 100 Output temperature drift Output noise - pp Output voltage trimming (1) Remote sense compensation OVP set point (2) Current limit Short circuit current (3) 50 0.5 115 105 20 Control Pin Characteristics Gate-in high threshold Gate-in low threshold Gate-in low current Power sharing accuracy 1.0 0.2 0.5 0.02 1.5 150 110 125 135 125 130 0.65 Isolation Characteristics Isolation (input to output) Isolation (output to baseplate) Isolation (input to baseplate) Input/output capacitance Environmental (MIL-STD-810 MIL-STD-810) Altitude - method 500.2 Humidity - method 507.2 Acceleration - method 513.3 Vibration - method 514.3 Shock - method 516.3 6 Mechanical Specifications Weight (1) 6 1.05 0.95 3,000 500 1,500 50 75 70,000 86 / 240 9 20 40 Thermal Characteristics Efficiency Baseplate to sink Thermal shutdown 90 Baseplate operating temperature Storage temperature UNITS TEST CONDITIONS Watts % Vnom % Vnom % Vnom %/°C % Vnom mV % Vnom Vdc % Vnom % Inom % Inom LL to HL, 10% to FL LL to HL, NL to 10% } Whichever is greater 20MHz BW Latching Auto restart Vdc Vdc mA Vrms Vrms Vrms pF feet % / hours g's g's g's 2,032,000 225,000 215,000 hours hours hours 80-90 0.07 95 % °C/W °C °C °C Procedure II Procedure 1, cycle 1 Procedure 2 Procedure 1, category 6 Procedure 1 6.0 (170) 105 +85 +100 With thermal pads Latching See product grade See product grade ounces (grams) 10V, 12V and 15V outputs, standard trim range ±10%. Consult factory for wider trim range. No over temperature or voltage protection in booster modules. (3) Output voltages of 5V or less incorporate foldback current limiting; outputs of 10V and above provide constant current limiting. (2) 1 of 2 MAX See input voltage chart 1.35 2.0 Reliability (MIL-HDBK-217F MIL-HDBK-217F) 25°C Ground Benign: G.B. 50°C Naval Sheltered: N.S. 65°C Airborne Inhabited Cargo: A.I.C. MI-200 MI-200 3/02 TYP Configuration Chart MI - 2 - Semi-custom driver and booster modules available: Consult factory. (1) 16V operation at 75% load. (2) These units rated at 75% load from 125-150Vin: MI-26Z-xV MI-26Y-xV MI-260-xW Nominal 2 5 6 7 Input Voltage Range Output Voltage Transient (1) = 28V = 155V = 270V = 165V 18 50V 100 210V (2) 125 400V 100 310V Product Grade I M Z Y 0 M 1 60V 230V 475V = = = = = Operating Temp. = = 2V 3.3V 5V 10V 12V 2 3 L 4 = = = = 15V 24V 28V 48V Output Power/Current 5V