NEW DATABASE - 350 MILLION DATASHEETS FROM 8500 MANUFACTURERS
NEW DATABASE - 350 MILLION DATASHEETS FROM 8500 MANUFACTURERS
MDR6100-4000 MDR6100 - Datasheet Archive
MODEL MDR6100-4000 (4000 MHz) Features ! ! ! ! Low Phase Noise: -122 dBc/Hz @ 100 kHz Low Spurious: -80 dBc Typical External
PHASE LOCKED OSCILLATOR MODEL MDR6100-4000 MDR6100-4000 (4000 MHz) Features ! ! ! ! Low Phase Noise: -122 dBc/Hz @ 100 kHz Low Spurious: -80 dBc Typical External Reference Environmental Screening Available Specifications1 CHARACTERISTIC Frequency (MHz)2 Mechanical Tuning Bandwidth (MHz)3 Output Power (dBm)4 Variation Over Temperature (dBm) Spurious (dBc) Phase Noise (dB)5 VSWR Harmonics (dBc) External Reference Lock Indicator Supply Power DC6 mA Phase Voltage Set to (nom.) Lock Range (min.) Phase-Lock Alarm Locked Unlocked7 TYPICAL Ta= 25 ºC 4000 MIN/MAX Ta = -20 ºC to +65 ºC 4000 +/- 10 +13 +/- 10 Min. +12 +/- 0.75 +/- 1 -80 -70 -106 dBc/Hz @ 1 KHz -116 dBc/Hz @ 10 KHz -122 dBc/Hz @ 100 KHz -138 dBc/Hz @ 1 MHz 1.5 2.0 -20 -15 100 MHz 1 / 200 MHz TTL (High=Locked) TTL (Low=Unlocked) +12 +12 265 275 +5.0 VDC +2 to +9 VDC Transistor Collector (NPN) Open Vc = 30 VDC max. Saturated to Ground Vce = +0.5 VDC max. Ic = 50 mA max. Spectrum Microwave, Inc. www.SpectrumMicrowave.com Description Spectrum Microwave's Series MDR6100 MDR6100 Phase Locked Oscillators use a Dielectric Resonator in the resonant circuit. The circuit is lightly loaded to obtain the lowest phase noise possible. The resonator is epoxied to a printed circuit board and well grounded to minimize modulation sidebands during shock and vibration. Buffer amplifiers are used to provide isolation from load VSWRs; Regulators filter noise on the DC input voltage. Internal reference models are also available. A lock indicator circuit is provided to signal an out-of-lock condition. Notes: 1. Specifications labeled "min." or "max." are guaranteed in a 50 Ohm system over the specified temperature range. 2. Output frequency must be specified, and it is an integer multiple of the internal crystal reference frequency. 3. Mechanical tuning of PLO in unlocked mode. 4. Higher output power is available. 5. Phase Noise at offsets