MB88F332 MB88F332AA MB88F332AB MB88F332BA MB88F332BB MB88F332CA MB88F332CB

Application Note an-mb88f332-chip-revision-rev0-01 GRAPHICS CONTROLLERS MB88F332 'INDIGO' CHIP REVISION APPLICATION NOTE GRAPHICS

Fujitsu Microelectronics Europe Application Note an-mb88f332-chip-revision-rev0-01 GRAPHICS CONTROLLERS MB88F332 MB88F332 'INDIGO' CHIP REVISION APPLICATION NOTE GRAPHICS COMPETENCE CENTER Revision History Revision History Date 2009-07-09 Issue Rev 0.01 GCC/HA First draft This document contains 5 pages. an-mb88f332-chip-revision-rev-0.10 -2- © Fujitsu Microelectronics Europe GmbH Warranty and Disclaimer Warranty and Disclaimer To the maximum extent permitted by applicable law, Fujitsu Microelectronics Europe GmbH restricts its warranties and its liability for all products delivered free of charge (eg. software include or header files, application examples, target boards, evaluation boards, engineering samples of IC's etc.), its performance and any consequential damages, on the use of the Product in accordance with (i) the terms of the License Agreement and the Sale and Purchase Agreement under which agreements the Product has been delivered, (ii) the technical descriptions and (iii) all accompanying written materials. In addition, to the maximum extent permitted by applicable law, Fujitsu Microelectronics Europe GmbH disclaims all warranties and liabilities for the performance of the Product and any consequential damages in cases of unauthorised decompiling and/or reverse engineering and/or disassembling. Note, all these products are intended and must only be used in an evaluation laboratory environment. 1. Fujitsu Microelectronics Europe GmbH warrants that the Product will perform substantially in accordance with the accompanying written materials for a period of 90 days form the date of receipt by the customer. Concerning the hardware components of the Product, Fujitsu Microelectronics Europe GmbH warrants that the Product will be free from defects in material and workmanship under use and service as specified in the accompanying written materials for a duration of 1 year from the date of receipt by the customer. 2. Should a Product turn out to be defect, Fujitsu Microelectronics Europe GmbH´s entire liability and the customer´s exclusive remedy shall be, at Fujitsu Microelectronics Europe GmbH´s sole discretion, either return of the purchase price and the license fee, or replacement of the Product or parts thereof, if the Product is returned to Fujitsu Microelectronics Europe GmbH in original packing and without further defects resulting from the customer´s use or the transport. However, this warranty is excluded if the defect has resulted from an accident not attributable to Fujitsu Microelectronics Europe GmbH, or abuse or misapplication attributable to the customer or any other third party not relating to Fujitsu Microelectronics Europe GmbH. 3. To the maximum extent permitted by applicable law Fujitsu Microelectronics Europe GmbH disclaims all other warranties, whether expressed or implied, in particular, but not limited to, warranties of merchantability and fitness for a particular purpose for which the Product is not designated. 4. To the maximum extent permitted by applicable law, Fujitsu Microelectronics Europe GmbH´s and its suppliers´ liability is restricted to intention and gross negligence. NO LIABILITY FOR CONSEQUENTIAL DAMAGES To the maximum extent permitted by applicable law, in no event shall Fujitsu Microelectronics Europe GmbH and its suppliers be liable for any damages whatsoever (including but without limitation, consequential and/or indirect damages for personal injury, assets of substantial value, loss of profits, interruption of business operation, loss of information, or any other monetary or pecuniary loss) arising from the use of the Product. Should one of the above stipulations be or become invalid and/or unenforceable, the remaining stipulations shall stay in full effect © Fujitsu Microelectronics Europe GmbH -3- an-mb88f332-chip-revision-rev-0.10 Contents Contents REVISION HISTORY. 2 WARRANTY AND DISCLAIMER . 3 CONTENTS . 4 1 INTRODUCTION. 5 1.1 Engineering Samples . 5 1.2 Production Sample. 5 an-mb88f332-chip-revision-rev-0.10 -4- © Fujitsu Microelectronics Europe GmbH Chapter 1 Introduction 1 Introduction This documents gives an overview about the chip revision marking and numbering scheme being used for MB88F332 MB88F332. 1.1 Engineering Samples Name/Version ES 1 sample Options Label/Marking with APIX Chip ID register values MB88F332AA MB88F332AA ® 0x20080000 -> Ver = 0x00 XXXX XXX ES E2 ES 1 sample ® without APIX CID = 0x00 Year = 0x2008 MB88F332AB MB88F332AB 0x20080000 -> Ver = 0x00 XXXX XXX ES E2 ES 2 sample ® with APIX CID = 0x00 Year = 0x2008 MB88F332BA MB88F332BA 0x20080001 -> Ver = 0x01 XXXX XXX ES E2 ES 2 sample without APIX® CID = 0x00 Year = 0x2008 MB88F332BB MB88F332BB 0x20080001 -> Ver = 0x01 XXXX XXX ES E2 ES 3 sample with APIX® CID = 0x00 Year = 0x2008 MB88F332CA MB88F332CA 0x20080002 -> Ver = 0x02 XXXX XXX ES E2 ES 3 sample without APIX® CID = 0x00 Year = 0x2008 MB88F332CB MB88F332CB 0x20080002 -> Ver = 0x02 XXXX XXX ES E2 1.2 CID = 0x00 Year = 0x2008 Production Sample Name/Version Options Label/Marking Chip ID register values CS 1 sample with APIX® MB88F332CA MB88F332CA 0x20080002 -> Ver = 0x02 XXXX XXX GS E2 CS 1 sample without APIX® CID = 0x00 Year = 0x2008 MB88F332CB MB88F332CB 0x20080002 -> Ver = 0x02 XXXX XXX CID = 0x00 GS E2 Year = 0x2008 © Fujitsu Microelectronics Europe GmbH -5- an-mb88f332-chip-revision-rev-0.10