E71639 MIL-STD-750 M-1040 M-1051 JESD22-A101 M-1031 M-1056 JESD22-A102 - Datasheet Archive

 

8 Amp Sensitive, Standard & Alternistor (High Commutation) Triacs Lxx08xx & Qxx08xx & Qxx08xHx Series ®

 

Teccor® brand Thyristors 8 Amp Sensitive, Standard & Alternistor (High Commutation) Triacs Lxx08xx & Qxx08xx & Qxx08xHx Series ® Description Sensitive type devices guarantee gate control in Quadrants I & IV needed for digital control circuitry. Standard type devices normally operate in Quadrants I & III triggered from AC line. Alternistor type devices only operate in quadrants I, II, & III and are used in circuits requiring high dv/dt capability. Agency Approval Agency Features & Benefits contact bounce that create voltage transients Agency File Number L Package: E71639 E71639 ® junctions to 1000 V Main Features Symbol V 5 to 50 IGT (Q1) A 400 to 1000 VDRM /VRRM to 100 A Unit 8 IT(RMS) Value mA "L-Package" is UL recognized for 2500Vrms from reaction of switching events generation, depending on activation point of sine wave activation pulse in each half-cycle eliminates arcing or Schematic Symbol Applications Excellent for AC switching and phase control applications such as heating, lighting, and motor speed controls. MT2 MT1 Typical applications are AC solid-state switches, light dimmers, power tools, home/brown goods and white goods appliances. G Alternistor Triacs (no snubber required) are used in applications with extremely inductive loads requiring highest commutation performance. Internally constructed isolated packages are offered for ease of heat sinking with highest isolation voltage. ©2008 Littelfuse, Inc. Specifications are subject to change without notice. Please refer to http://www.littelfuse.com for current information. 75 Revised: July 9, 2008 Lxx08xx & Qxx08xx & Qxx08xHx Series 8.0A TRIACs 8 Amp bi-directional solid state switch series is designed for AC switching and phase control applications such as motor speed and temperature modulation controls, lighting controls, and static switching relays. Teccor® brand Thyristors 8 Amp Sensitive, Standard & Alternistor (High Commutation) Triacs Absolute Maximum Ratings - Sensitive Triac (4 Quadrants) Symbol IT(RMS) Parameter RMS on-state current (full sine wave) ITSM Lxx08Ly TC = 85°C f = 50 Hz t = 20 ms 65 t = 16.7 ms 85 tp = 8.3 ms Critical rate of rise of on-state current IG = 50mA with 0.1s rise time IGTM Peak gate trigger current PG(AV) A f = 60 Hz I2t Value for fusing di/dt Unit 8 TC = 80°C Lxx08Ry / Lxx08Vy / Lxx08Dy Non repetitive surge peak on-state current (full cycle, TJ initial = 25°C) I2t Value Average gate power dissipation A 26.5 A2s f = 120 Hz TJ = 110°C 70 A/s tp TJ = 110°C 1.6 A TJ = 110°C 0.4 W Storage temperature range -40 to 150 °C Operating junction temperature range -40 to 110 °C Tstg TJ 10 s Note: xx = voltage, y = sensitivity Absolute Maximum Ratings - Standard Triac Symbol IT(RMS) Parameter RMS on-state current (full sine wave) ITSM 8 A TC = 95°C Qxx08Ly TC = 90°C f = 50 Hz t = 20 ms 83 f = 60 Hz t = 16.7 ms 100 I2t Value for fusing A2s TJ = 125°C 70 A/s TJ = 125°C 1.8 A TJ = 125°C 0.5 W Storage temperature range -40 to 150 °C Operating junction temperature range -40 to 125 °C Critical rate of rise of on-state current IG = 200mA with 0.1s rise time IGTM Peak gate trigger current PG(AV) tp = 8.3 ms A 41 di/dt Average gate power dissipation Tstg TJ Unit Qxx08Ry / Qxx08Ny Non repetitive surge peak on-state current (full cycle, TJ initial = 25°C) I 2t Value f = 120 Hz tp 10 s; IGT TGTM Note: xx = voltage, y = sensitivity Lxx08xx & Qxx08xx & Qxx08xHx Series 76 Revised: July 9, 2008 ©2008 Littelfuse, Inc. Specifications are subject to change without notice. Please refer to http://www.littelfuse.com for current information. Teccor® brand Thyristors 8 Amp Sensitive, Standard & Alternistor (High Commutation) Triacs Absolute Maximum Ratings - Alternistor (3 Quadrants) Parameter Value Qxx08LHy IT(RMS) 8 A TC = 90°C Qxx08RHy / Qxx08NHy Qxx08VHy / Qxx08DHy RMS on-state current (full sine wave) Unit TC = 95°C Qxx08VHy / Qxx08DHy Non repetitive surge peak on-state current (full cycle, TJ initial = 25°C) f = 60 Hz I2t I2t Value for fusing t = 16.7 ms tp = 8.3 ms 85 Qxx08LHy / Qxx08RHy / Qxx08NHy t = 20 ms 83 100 Qxx08VHy / Qxx08DHy ITSM Qxx08LHy / Qxx08RHy / Qxx08NHy Qxx08VHy / Qxx08DHy f = 50 Hz 80 30 A A2s PG(AV) Qxx08VHy / Qxx08DHy tP 10 s; IGT IGTM Average gate power dissipation 1.6 Qxx08LHy / Qxx08RHy / Qxx08NHy 2.0 Qxx08VHy / Qxx08DHy 0.4 Qxx08LHy / Qxx08RHy / Qxx08NHy TJ = 125°C TJ = 125°C A/s A W 0.5 Storage temperature range -40 to 150 °C Operating junction temperature range -40 to 125 °C Tstg TJ 70 f = 120 Hz Peak gate trigger current IGTM TJ = 125°C IGT = 35mA Critical rate of rise of on-state current 41 IGT = 10mA di/dt Qxx08LHy / Qxx08RHy / Qxx08NHy Note: xx = voltage, y = sensitivity Electrical Characteristics (TJ = 25°C, unless otherwise specified) - Sensitive Triac (4 Quadrants) Symbol IGT Test Conditions Quadrant Lxx08x6 Lxx08x8 Unit 5 10 10 20 mA I ­ II ­ III IV VGT VGD VD = VDRM RL = 3.3 k IH VD = VDRM Gate Open TJ = 100°C (dv/dt)c 1.3 V ALL MIN. 0.2 V (di/dt)c = 4.3 A/ms TJ = 110°C tgt MAX. IT = 100mA dv/dt MAX. ALL VD = 12V RL = 60 IG = 100mA PW = 15s IT = 11.3 A(pk) TJ = 110°C MAX. 400V 10 20 mA 30 40 20 30 TYP . 2 2 V/s TYP . 3.0 3.2 s TYP . 600V V/s Note: xx = voltage, x = package, y = sensitivity ©2008 Littelfuse, Inc. Specifications are subject to change without notice. Please refer to http://www.littelfuse.com for current information. 77 Revised: July 9, 2008 Lxx08xx & Qxx08xx & Qxx08xHx Series 8.0A TRIACs Symbol Teccor® brand Thyristors 8 Amp Sensitive, Standard & Alternistor (High Commutation) Triacs Electrical Characteristics (TJ = 25°C, unless otherwise specified) - Standard Triac Symbol IGT Test Conditions Quadrant Qxx80x4 Qxx80x5 Unit 25 50 50 75 mA I ­ II ­ III IV VGT VGD VD = VDRM RL = 3.3 k IH MAX. TYP . I ­ II ­ III VD = 12V RL = 60 MAX. 1.3 V ALL MIN. 0.2 V IT = 200mA TJ = 125°C MAX. 50 400V dv/dt VD = VDRM Gate Open TJ = 125°C 50 mA 150 600V 125 MIN. 800V V/s 100 1000V 80 (dv/dt)c (di/dt)c = 4.3 A/ms TJ = 125°C TYP . 4 4 V/s tgt IG = 100mA PW = 15s IT = 11.3 A(pk) TYP . 3.0 3.0 s Qxx08xH3 Qxx08xH4 Unit 10 35 mA Electrical Characteristics (TJ = 25°C, unless otherwise specified) - Alternistor Triac (3 Quadrants) Symbol IGT Test Conditions Quadrant I ­ II ­ III VGT VGD VD = VDRM RL = 3.3 k IH MAX. I ­ II ­ III VD = 12V RL = 60 MAX. 1.3 V I ­ II ­ III MIN. 0.2 V IT = 100mA TJ = 125°C MAX. dv/dt 35 400V 75 400 600V Qxx08LHy / Qxx08RHy / Qxx08NHy 15 50 300 800V VD = VDRM Gate Open TJ = 125°C MIN. 200 1000V 100 400V 75 450 600V Qxx08VHy / Qxx08DHy mA 50 V/s 350 800V 250 1000V 150 (dv/dt)c (di/dt)c = 4.3 A/ms TJ = 125°C MIN. 20 25 V/s tgt IG = 100mA PW = 15s IT = 11.3 A(pk) TYP . 4.0 4.0 s Note : xx = voltage, x = package, y = sensitivity Lxx08xx & Qxx08xx & Qxx08xHx Series 78 Revised: July 9, 2008 ©2008 Littelfuse, Inc. Specifications are subject to change without notice. Please refer to http://www.littelfuse.com for current information. Teccor® brand Thyristors 8 Amp Sensitive, Standard & Alternistor (High Commutation) Triacs Static Characteristics Test Conditions VTM Value ITM = 11.3A tp = 380 s 1.60 MAX. Unit V TJ = 25°C IRRM 400 - 600V 0.5 mA 400 - 1000V 50 A 400 - 800V 2 TJ = 100°C VDRM = VRRM A TJ = 125°C Qxx08xy 20 TJ = 25°C IDRM 400 - 600V TJ = 110°C Lxx08xy 1000V MAX. 10 1000V 20 TJ = 125°C 400 - 800V 2 TJ = 100°C Qxx08xHy mA 3 400 - 800V 1000V 3 TJ = 25°C 8.0A TRIACs Symbol A mA Thermal Resistances Symbol Parameter Value L/Qxx08Ryy / L/Qxx08Nyy 2.1 45 L/Qxx08Lyy 50 L/Qxx08Vyy Junction to ambient (J-A) 2.8 L/Qxx08Ryy R L/Qxx08Lyy Junction to case (AC) (J-C) 1.5 L/Qxx08Vyy R Unit 64 °C/W °C/W Note: xx = voltage, x = package, y = sensitivity, yy = type & sensitivity Figure 2: Normalized DC Gate Trigger Current for All Quadrants vs. Junction Temperature Figure 1: Definition of Quadrants ALL POLARITIES ARE REFERENCED TO MT1 + (+) I GT GATE MT1 REF I GT MT2 (-) MT1 REF QII QI QIII QIV - 3.0 IGT I GT GATE 3.5 MT2 I GT GATE (+) IGT (TJ = 25°C) (-) MT2 POSITIVE (Positive Half Cycle) Ratio of MT2 + IGT MT2 2.5 2.0 1.5 1.0 0.5 I GT GATE 0.0 MT1 REF - MT2 NEGATIVE (Negative Half Cycle) -65 MT1 -40 -15 10 35 60 85 110 125 Junction Temperature (TJ)- ºC REF Note: Alternistors will not operate in QIV ©2008 Littelfuse, Inc. Specifications are subject to change without notice. Please refer to http://www.littelfuse.com for current information. 79 Revised: July 9, 2008 Lxx08xx & Qxx08xx & Qxx08xHx Series Teccor® brand Thyristors 8 Amp Sensitive, Standard & Alternistor (High Commutation) Triacs Figure 3: Normalized DC Holding Current vs. Junction Temperature Figure 4: Normalized DC Gate Trigger Voltage for All Quadrants vs. Junction Temperature 3.5 2.0 VGT 2.0 VGT (TJ = 25°C) 2.5 1.5 1.0 1.5 Ratio of IH Ratio of IH (TJ = 25°C) 3.0 1.0 0.5 0.5 0.0 0.0 -65 -40 -15 10 35 60 85 110 -65 125 -40 -15 Figure 5: Power Dissipation (Typical) vs. RMS On-State Current 60 85 110 125 110 16 105 Lxx08Vy Lxx08Dy Lxx08Ry 100 14 Maximum Allowable Case Temperature (TC) - °C Average On-State Power Dissipation (PD(AV) - Watts 35 Figure 6: Maximum Allowable Case Temperature vs. On-State Current (Sensitive Triac) 18 12 10 8 6 4 95 90 Lxx08Ly 85 80 CURRENT WAVEFORM: Sinusoidal LOAD: Resistive or Inductive CONDUCTION ANGLE: 360 CASE TEMPERATURE: Measured as shown on Dimensional Drawings 75 70 65 2 60 0 0 2 4 6 8 10 0 1 2 RMS On-State Current (IT(RMS) - Amps 3 4 5 6 7 8 RMS On-State Current (IT(RMS) - Amps Figure 7: Maximum Allowable Case Temperature vs. On-State Current (Standard / Alternistor Triac) Figure 8: On-State Current vs. On-State Voltage (Typical) 20 Postitive or Negative Instantaneous On-State Current (iT) - Amps 130 Qxx08Ryy Qxx08Nyy Qxx08Vyy Qxx08Dyy 120 Maximum Allowable Case Temperature (TC) - °C 10 Junction Temperature (TJ)- ºC Junction Temperature (TJ)- ºC 110 100 Qxx08Lyy 90 80 70 TC = 25°C 16 12 8 4 0 60 0 1 2 3 4 5 6 7 0.6 8 0.8 1.0 1.2 1.4 1.6 Postitive or Negative Instantaneous On-State Voltage (vT) - Volts RMS On-State Current (IT(RMS) - Amps Note: xx = voltage, x = package, y = sensitivity, yy = type & sensitivity Lxx08xx & Qxx08xx & Qxx08xHx Series 80 Revised: July 9, 2008 ©2008 Littelfuse, Inc. Specifications are subject to change without notice. Please refer to http://www.littelfuse.com for current information. Teccor® brand Thyristors 8 Amp Sensitive, Standard & Alternistor (High Commutation) Triacs Figure 9: Maximum Allowable Ambient Temperature vs. On-State Current CURRENT WAVEFORM: Sinusoidal LOAD: Resistive or Inductive CONDUCTION ANGLE: 360 FREE AIR RATING - NO HEATSINK 100 80 L/Qxx08Lyy L/Qxx08Ryy 60 8.0A TRIACs Maximum Allowable Ambient Temperature (TA) - °C 120 L/Qxx08Vyy 40 20 0.0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 1.8 RMS On-State Current (IT(RMS) - Amps Figure 10: Surge Peak On-State Current vs. Number of Cycles 100 Peak Surge (Non-Repetitive) On-State Current (ITSM) - Amps L/Qxx08Ryy L/Qxx08Lyy L/Qxx08Nyy SUPPLY FREQUENCY: 60 Hz Sinusoidal LOAD: Resistive RMS On-State Current: [IT(RMS)]: Maximum Rated Value at Specified Case Temperature L/Qxx08Vyy L/Qxx08Dyy Notes: 1. Gate control may be lost during and immediately following surge current interval. 2. Overload may not be repeated until junction temperature has returned to steady-state rated value. 10 1 1 10 100 1000 Surge Current Duration- Full Cycles Note: xx = voltage, x = package, y = sensitivity, yy = type & sensitivity ©2008 Littelfuse, Inc. Specifications are subject to change without notice. Please refer to http://www.littelfuse.com for current information. 81 Revised: July 9, 2008 Lxx08xx & Qxx08xx & Qxx08xHx Series Teccor® brand Thyristors 8 Amp Sensitive, Standard & Alternistor (High Commutation) Triacs Soldering Parameters Reflow Condition Pb ­ Free assembly tP TP Pre Heat 150°C - Temperature Max (Ts(max) 200°C - Time (min to max) (ts) Temperature - Temperature Min (Ts(min) 60 ­ 180 secs Average ramp up rate (Liquidus Temp) (TL) to peak 5°C/second max TS(max) to TL - Ramp-up Rate Ramp-up TL tL TS(max) Ramp-do Ramp-down 5°C/second max Reflow - Temperature (TL) (Liquidus) 217°C - Temperature (tL) Preheat TS(min) 60 ­ 150 seconds Peak Temperature (TP) 8 minutes Max. Do not exceed Time 5°C/second max Time 25°C to peak Temperature (TP) time to peak temperature 20 ­ 40 seconds Ramp-down Rate 25 260+0/-5 °C Time within 5°C of actual peak Temperature (tp) tS 280°C Physical Specifications Terminal Finish Environmental Specifications Test 100% Matte Tin-plated AC Blocking (VDRM) Body Material Terminal Material UL recognized epoxy meeting flammability classification 94V-0 Temperature Cycling Copper Alloy Temperature/ Humidity Design Considerations High Temp Storage Careful selection of the correct device for the application's operating parameters and environment will go a long way toward extending the operating life of the Thyristor. Good design practice should limit the maximum continuous current through the main terminals to 75% of the device rating. Other ways to ensure long life for a power discrete semiconductor are proper heat sinking and selection of voltage ratings for worst case conditions. Overheating, overvoltage (including dv/dt), and surge currents are the main killers of semiconductors. Correct mounting, soldering, and forming of the leads also help protect against component damage. Low-Temp Storage Lxx08xx & Qxx08xx & Qxx08xHx Series Thermal Shock Autoclave Specifications and Conditions MIL-STD-750 MIL-STD-750, M-1040 M-1040, Cond A Applied Peak AC voltage @ 125°C for 1008 hours MIL-STD-750 MIL-STD-750, M-1051 M-1051, 100 cycles; -40°C to +150°C; 15-min dwell-time EIA / JEDEC, JESD22-A101 JESD22-A101 1008 hours; 320V - DC: 85°C; 85% rel humidity MIL-STD-750 MIL-STD-750, M-1031 M-1031, 1008 hours; 150°C 1008 hours; -40°C MIL-STD-750 MIL-STD-750, M-1056 M-1056 10 cycles; 0°C to 100°C; 5-min dwelltime at each temperature; 10 sec (max) transfer time between temperature EIA / JEDEC, JESD22-A102 JESD22-A102 168 hours (121°C at 2 ATMs) and 100% R/H Resistance to Solder Heat MIL-STD-750 MIL-STD-750 Method 2031 Solderability ANSI/J-STD-002 ANSI/J-STD-002, category 3, Test A Lead Bend MIL-STD-750 MIL-STD-750, M-2036 M-2036 Cond E 82 Revised: July 9, 2008 ©2008 Littelfuse, Inc. Specifications are subject to change without notice. Please refer to http://www.littelfuse.com for current information. Teccor® brand Thyristors 8 Amp Sensitive, Standard & Alternistor (High Commutation) Triacs Dimensions - TO-220AB (R-Package) - Non-Isolated Mounting Tab Common with Center Lead O Dimension 8.13 .320 Inches Millimeters P B C 13.36 .526 Max Min Max 0.380 0.420 9.65 10.67 B MT2 Min A A E AREA (REF.) 0.17 IN2 0.105 0.115 2.67 2.92 C F R G 6.35 14.99 15.75 0.142 0.147 3.61 3.73 0.110 0.130 2.79 3.30 0.540 0.575 13.72 14.61 H L 5.84 0.620 G NOTCH IN GATE LEAD TO ID. NON-ISOLATED TAB 0.250 0.590 F 7.01 .276 0.230 D E D 0.025 0.035 0.64 0.89 J K N J MT1 MT2 GATE 0.205 4.95 5.21 0.095 0.105 2.41 2.67 L 0.060 0.075 1.52 1.91 M Note: Maximum torque to be applied to mounting tab is 8 in-lbs. (0.904 Nm). M 0.195 K H 0.085 0.095 2.16 2.41 N 0.018 0.024 0.46 0.61 O 0.178 0.188 4.52 4.78 P 0.045 0.060 1.14 1.52 R 0.038 0.048 0.97 1.22 Min Max Min Max A 0.380 0.420 9.65 10.67 B 0.105 0.115 2.67 2.92 Dimensions - TO-220AB (L-Package) - Isolated Mounting Tab TC MEASURING POINT O A E AREA (REF.) 0.17 IN2 Dimension 8.13 .320 P B C 13.36 .526 Inches Millimeters C 6.35 14.99 15.75 0.142 0.147 3.61 3.73 0.110 0.130 2.79 3.30 0.540 0.575 13.72 14.61 H R G 5.84 0.620 G F 0.250 0.590 F 7.01 .276 0.230 D E D 0.025 0.035 0.64 0.89 L J K N J MT1 MT2 GATE M 0.205 4.95 5.21 0.095 0.105 2.41 2.67 L 0.060 0.075 1.52 1.91 M Note: Maximum torque to be applied to mounting tab is 8 in-lbs. (0.904 Nm). 0.195 K H 0.085 0.095 2.16 2.41 N 83 Revised: July 9, 2008 0.46 0.61 0.188 4.52 4.78 P ©2008 Littelfuse, Inc. 0.024 0.178 0.045 0.060 1.14 1.52 R Specifications are subject to change without notice. Please refer to http://www.littelfuse.com for current information. 0.018 O 0.038 0.048 0.97 1.22 Lxx08xx & Qxx08xx & Qxx08xHx Series 8.0A TRIACs TC MEASURING POINT Teccor® brand Thyristors 8 Amp Sensitive, Standard & Alternistor (High Commutation) Triacs Dimensions - TO-263AA (N-Package) - D2-PAK Surface Mount TC MEASURING POINT B AREA: 0.11 IN2 C V Dimension E MT2 7.01 .276 A Millimeters Max A 0.360 0.370 9.14 9.40 B 8.41 .331 Min Max 0.380 0.420 9.65 10.67 C 8.13 .320 H F D 11.68 .460 2.16 .085 4.78 0.89 0.045 0.060 1.14 1.52 0.060 0.075 1.52 1.91 0.095 0.105 2.41 2.67 H G 4.52 0.64 F J K GATE 0.188 0.035 E U 0.025 G W 0.178 D S MT1 Inches Min 0.092 0.102 2.34 2.59 J 0.590 0.625 14.99 15.88 0.035 0.045 0.89 1.14 0.002 0.010 0.05 0.25 0.040 0.070 1.02 1.78 Min Max Min A 0.040 0.050 1.02 1.27 B 3.81 .150 2.79 V 1.40 .055 0.61 2.29 U 8.89 .350 0.46 0.110 S 7.01 .276 0.024 0.090 W 7.01 .276 16.89 .665 0.018 K 0.235 0.245 5.97 6.22 2.03 .080 6.60 .260 Dimensions - TO-251AA (V-Package) - V-PAK Through Hole TC MEASURING POINT AREA: 0.040 IN2 Dimension E H D 5.28 .208 J MT2 A 5.34 .210 Inches Millimeters Max C 8.89 9.53 0.213 5.21 5.41 0.255 0.265 6.48 6.73 F 0.027 0.033 0.69 0.84 G 0.087 0.093 2.21 2.36 H C 0.375 0.205 E K 0.350 D B 0.085 0.095 2.16 2.41 I MT1 MT2 F Lxx08xx & Qxx08xx & Qxx08xHx Series 84 Revised: July 9, 2008 4.47 4.67 0.023 0.46 0.58 0.038 0.044 0.97 1.12 L G I 0.184 0.018 K L 0.176 J GATE 0.018 0.023 0.46 0.58 ©2008 Littelfuse, Inc. Specifications are subject to change without notice. Please refer to http://www.littelfuse.com for current information. Teccor® brand Thyristors 8 Amp Sensitive, Standard & Alternistor (High Commutation) Triacs Dimensions - TO-252AA (D-Package) - D-PAK Surface Mount E D TC MEASURING POINT MT2 5.28 .208 A 5.34 .210 B L O K J H M GATE F MT1 AREA : 0.040 IN2 G I Dimension Pad Layout for TO-252AA (D-Package) Inches Min Millimeters Max Min Max A 6.71 .264 0.040 0.050 1.02 1.27 B 0.235 0.245 5.97 6.22 C 2.87 5.21 5.41 0.255 0.265 6.48 6.73 0.027 0.033 0.69 0.84 G 0.087 0.093 2.21 2.36 H 1.80 .071 2.69 0.213 F 1.60 .063 0.113 0.205 E 6.71 .264 0.106 D 0.085 0.095 2.16 2.41 I Revised: July 9, 2008 0.58 0.038 0.044 0.97 1.12 0.018 0.023 0.46 0.58 0.000 0.004 0.00 0.10 0.021 0.027 0.53 0.69 O 85 4.67 0.46 N ©2008 Littelfuse, Inc. 4.47 0.023 M Specifications are subject to change without notice. Please refer to http://www.littelfuse.com for current information. 0.184 0.018 L 4.60 .181 0.176 J K 3 .118 0° 5° 0° 5° Lxx08xx & Qxx08xx & Qxx08xHx Series 8.0A TRIACs N MT2 C Teccor® brand Thyristors 8 Amp Sensitive, Standard & Alternistor (High Commutation) Triacs Product Selector Part Number Voltage (xx) Gate Sensitivity Quadrants Type Package 10 mA Sensitive Triac TO-220L 5 mA 10 mA Sensitive Triac TO-252 D-PAK X 5mA 10mA Sensitive Triac TO-220R X X 5 mA 10 mA Sensitive Triac TO-251 V-PAK Lxx08L8 X X 10 mA 20 mA Sensitive Triac TO-220L Lxx08D8 X X 10 mA 20 mA Sensitive Triac TO-252 D-PAK Lxx08R8 X X 10mA 20mA Sensitive Triac TO-220R Lxx08V8 X X 10 mA 20 mA Sensitive Triac TO-251 V-PAK Qxx08RH3 X X 10 mA Alternistor Triac TO-220R Qxx08VH3 X X 10 mA Alternistor Triac TO-251 V-PAK Qxx08DH3 X X 10 mA Alternistor Triac TO-252 D-PAK Qxx08L4 X 25 mA Triac TO-220L Qxx08R4 X 25 mA Triac TO-220R Qxx08N4 X 25 mA Triac TO-263 D²-PAK Qxx08LH4 X X X X 35 mA Alternistor Triac TO-220L Qxx08RH4 X X X X 35 mA Alternistor Triac TO-220R Qxx08VH4 X X X X 35 mA Alternistor Triac TO-251 V-PAK Qxx08DH4 X X X X 35 mA Alternistor Triac TO-252 D-PAK Qxx08NH4 X X X X 35 mA Alternistor Triac TO-263 D²-PAK Qxx08L5 X X X 50 mA Triac TO-220L Qxx08R5 X X X 50 mA Triac TO-220R Qxx08N5 X X X 50 mA Triac TO-263 D²-PAK 400V 600V Lxx08L6 X Lxx08D6 800V 1000V I ­ II ­ III IV X 5 mA X X Lxx08R6 X Lxx08V6 Packing Options Part Number Marking Weight Packing Mode Base Quantity L/Qxx08L/Ryy L/Qxx08L/Ryy 2.2 g Bulk 500 L/Qxx08L/RyyTP L/Qxx08L/Ryy 2.2 g Tube Pack 500 Qxx08NyyTP Qxx08Nyy 1.6 g Tube 500 Qxx08NyyRP Qxx08Nyy 1.6 g Embossed Carrier 500 L/Qxx08DyyTP L/Qxx08Dyy 0.3 g Tube 750 L/Qxx08DyyRP L/Qxx08Dyy 0.3 g Embossed Carrier 2500 L/Qxx08VyyTP L/Qxx08Vyy 0.4 g Tube 750 Note: xx = voltage, x = package, y = sensitivity, yy = type & sensitivity Lxx08xx & Qxx08xx & Qxx08xHx Series 86 Revised: July 9, 2008 ©2008 Littelfuse, Inc. Specifications are subject to change without notice. Please refer to http://www.littelfuse.com for current information. Teccor® brand Thyristors 8 Amp Sensitive, Standard & Alternistor (High Commutation) Triacs TO-252 Embossed Carrier Reel Pack (RP) Specifications Meets all EIA-481-2 EIA-481-2 Standards * Cover tape 0.315 (8.0) MT1 / Cathode XXXXXX XX XXXXXX DC XX XXXXXX DC * XX 0.524 (13.3) XXXXXX 0.63 (16.0) DC 0.059 Dia (1.5) Gate 8.0A TRIACs 0.157 (4.0) MT2 / Anode 12.99 (330.0) 0.512 (13.0) Arbor Hole Dia. Dimensions are in inches (and millimeters). 0.64 (16.3) Direction of Feed TO-263 Embossed Carrier Reel Pack (RP) Specifications Meets all EIA-481-2 EIA-481-2 Standards 0.63 (16.0) 0.157 (4.0) Gate 0.059 DIA (1.5) MT1 / Cathode 0.945 (24.0) 0.827 (21.0) * * Cover tape MT2 / Anode 0.512 (13.0) Arbor Hole Dia. 12.99 (330.0) Dimensions are in inches (and millimeters). 1.01 (25.7) Direction of Feed ©2008 Littelfuse, Inc. Specifications are subject to change without notice. Please refer to http://www.littelfuse.com for current information. 87 Revised: July 9, 2008 Lxx08xx & Qxx08xx & Qxx08xHx Series Teccor® brand Thyristors 8 Amp Sensitive, Standard & Alternistor (High Commutation) Triacs Part Numbering System Part Marking System Q 60 08 L 5 56 L6008V5 L6008V5 CURRENT 08: 8A SENSITIVITY & TYPE Sensitive Triac: 6 : 5 mA (QI, II, III) 10 mA (QIV) 8 : 10 mA (QI, II, III) 20 mA (QIV) Standard Triac: 4 : 25 mA (QI, II, III) 5 : 50 mA (QI, II, III) Alternistor Triac: H3 : 10 mA (QI, II, III) H4 : 35 mA (QI, II, III) yxxxx VOLTAGE RATING 40 : 400V 60 : 600V 80 : 800V K0 : 1000V LEAD FORM DIMENSIONS xx : Lead Form Option ® DEVICE TYPE L : Sensitive Triac Q : Triac or Alternistor TO-252AA ­ (D Package) TO-251AA ­ (V Package) ® PACKAGE TYPE L : TO-220 Isolated R : TO-220 Non-Isolated N : TO-263 (D2PAK) V : TO-251 (VPAK) D : TO-252 (DPAK) Lxx08xx & Qxx08xx & Qxx08xHx Series 88 Revised: July 9, 2008 ©2008 Littelfuse, Inc. Specifications are subject to change without notice. Please refer to http://www.littelfuse.com for current information.