MNLM149-X LM149 LM741 LM148 LM1558 LM149J/883 MIL-STD-883 LM124 09173HRA2

Original Creation Date: 08/08/95 Last Update Date: 10/23/98 Last Major Revision Date: 08/08/95 MNLM149-X REV 0B1 QUAD OP AMP

MICROCIRCUIT DATA SHEET Original Creation Date: 08/08/95 Last Update Date: 10/23/98 Last Major Revision Date: 08/08/95 MNLM149-X MNLM149-X REV 0B1 QUAD OP AMP General Description The LM149 LM149 is a quad op amp. It consists of four independent, high gain, internally compensated, low power operational amplifiers which have been designed to provide functional characteristics identical to those of the familiar LM741 LM741 operational amplifier. In addition the total supply current for all four amplifiers is comparable to the supply current of a single LM741 LM741 type op amp. Other features include input offset currents and input bias current which are much less than those of standard LM741 LM741. Also, excellent isolation between amplifiers has been achieved by independently biasing each amplifier and using layout techniques which minimize thermal coupling. The LM149 LM149 has the same features as the LM148 LM148 plus a gain bandwidth product of a 4 MHz at a gain of 5 or greater. The LM149 LM149 can be used anywhere multiple LM741 LM741 or LM1558 LM1558 type amplifiers are being used and in applications where amplifier matching, high packing density, or high speed is required. Industry Part Number NS Part Numbers LM149 LM149 LM149J/883 LM149J/883 Prime Die LM149 LM149 Processing Subgrp Description MIL-STD-883 MIL-STD-883, Method 5004 1 2 3 4 5 6 7 8A 8B 9 10 11 Quality Conformance Inspection MIL-STD-883 MIL-STD-883, Method 5005 1 Static tests at Static tests at Static tests at Dynamic tests at Dynamic tests at Dynamic tests at Functional tests at Functional tests at Functional tests at Switching tests at Switching tests at Switching tests at Temp ( oC) +25 +125 -55 +25 +125 -55 +25 +125 -55 +25 +125 -55 MICROCIRCUIT DATA SHEET MNLM149-X MNLM149-X REV 0B1 Features - 741 op amp operating characteristics Low supply current drain Class AB output stage-no crossover distortion Pin compatible with the LM124 LM124 Low input offset voltage Low input offset current Low input bias current Gain bandwidth product (Av > 5) High degree of isolation between amplifiers Overload protection for inputs and outputs 2 0.6mA/Amplifier 1mV 4nA 30nA 4Mhz 120dB MICROCIRCUIT DATA SHEET MNLM149-X MNLM149-X REV 0B1 (Absolute Maximum Ratings) (Note 1) Supply Voltage + 22V Differential Input Voltage + 44V Output Short Circuit Duration (Note 2) Continuous Power Dissipation (Note 3) (Pd at 25 C) Maximum Junction Temperature (TjMAX) 1100mW 150 C Operating Temperature Range -55 C < TA < +125 C Storage Temperature Range -65 C to +150 C Lead Temperature (Soldering, 10 seconds) 300 C Thermal Resistance ThetaJA (Still Air) (500LF/Min Air flow) 103 C/W 52 C/W ThetaJC ESD Tolerance (Note 4) 19 C/W 500V Note 1: Note 2: Note 3: Note 4: Absolute Maximum Ratings indicate limits beyond which damage to the device may occur. Operating Ratings indicate conditions for which the device is functional, but do not guarantee specific performance limits. For guaranteed specifications and test conditions, see the Electrical Characteristics. The guaranteed specifications apply only for the test conditions listed. Some performance characteristics may degrade when the device is not operated under the listed test conditions. Any of the amplifier outputs can be shorted to ground indefinitely however, more than one should not be simultaneously shorted as the maximum junction temperature will be exceeded. The maximum power dissipation must be derated at elevated temperatures and is dictated by Tjmax (maximum junction temperature), ThetaJA (package junction to ambient thermal resistance), and TA (ambient temperature). The maximum allowable power dissipation at any temperature is Pdmax = (Tjmax - TA)/ThetaJA or the number given in the Absolute Maximum Ratings, whichever is less. Human body model, 1.5K Ohms in series with 100pF. 3 MICROCIRCUIT DATA SHEET MNLM149-X MNLM149-X REV 0B1 Electrical Characteristics DC PARAMETERS (The following conditions apply to all the following parameters, unless otherwise specified.) DC: Vs = +15V, Rs = 0. SYMBOL Vio PARAMETER NOTES MIN MAX UNIT SUBGROUPS Avs+ Input Bias Current mV 2, 3 25 nA 1 75 nA 2, 3 nA 1 nA 2, 3 +100 nA 1 nA 2, 3 Rs = 10K Ohms Rl = 2K Ohms, Vout = 0V to -10V, Rs = 10K Ohms 50 K 1 25 K 2, 3 2 50 K 1 2 Open Loop Voltage Gain Rl = 2K Ohms, Vout = 0V to +10V, Rs = 10K Ohms 2 2 Avs- Open Loop Voltage Gain 6 -100 Rs = 10K Ohms 1 +325 -Iib Input Bias Current mV -25 Rs = 10K Ohms 5 -325 +Iib -5 -75 Input Offset Current Rs = 10K Oohms PINNAME -6 Iio Input Offset Voltage CONDITIONS 25 K 2, 3 mA 1 Icc Power Supply Current Vs = + 15V CMRR Common Mode Rejection Ratio Vcm = +12V 70 dB 1, 2, 3 SVRR Supply Voltage Rejection Ratio Rs = 10K Ohms, Vs = +15 to +5V 77 dB 1, 2, 3 +Swing Output Voltage Swing Rl = 10K Ohms +12 V 1, 2, 3 Rl = 2K Ohms +10 V 1, 2, 3 -Swing Output Voltage Swing 3.6 Rl = 10K Ohms -12 V 1, 2, 3 Rl = 2K Ohms -10 V 1, 2, 3 Ios+ Short Circuit Current -45 -14 mA 1 Ios- Short Circuit Current +14 +45 mA 1 IBVcc Breakdown Supply Current Vs = +22V, Vin = +19V 9 mA 1, 2, 3 +Il Input Leakage Current Vs = +22V, Vin = +19V +10 uA 1, 2, 3 -Il Input Leakage Current Vs = +22V, Vin = +19V uA 1, 2, 3 -10 4 MICROCIRCUIT DATA SHEET MNLM149-X MNLM149-X REV 0B1 Electrical Characteristics DC PARAMETERS(Continued) (The following conditions apply to all the following parameters, unless otherwise specified.) DC: Vs = +15V, Rs = 0. SYMBOL PARAMETER Rin Input Voltage Range NOTES Input Resistance Vin CONDITIONS PINNAME MIN MAX UNIT SUBGROUPS Differential Input Voltage 0.8 MOhms 1 Vs = +22V 1 +19 V 1 Vs = +15V Vdiff 1 1 +12 V 1, 2, 3 Vcc = +22V 1 +38 V 1 MHz 7 AC PARAMETERS (The following conditions apply to all the following parameters, unless otherwise specified.) AC: Vs = +15V, Rs = 0. Gbw Gain Bandwidth Product 1 2 DC PARAMETERS: DRIFT VALUES (The following conditions apply to all the following parameters, unless otherwise specified.) DC: Vs = +15V, Rs = 0. "Deltas not required on B-Level product. Deltas required for S-Level product ONLY as specified on Internal Processing Instructions (IPI)." Vio Input Offset Voltage Rs = 10K Ohms -1 1 mV 1 Iio Input Offset Current Rs = 10K Ohms -5 5 nA 1 Note 1: Note 2: Parameter tested go-no-go. K = V/mV. 5 MICROCIRCUIT DATA SHEET MNLM149-X MNLM149-X REV 0B1 Graphics and Diagrams GRAPHICS# DESCRIPTION 09173HRA2 09173HRA2 CERDIP (J), 14 LEAD (B/I CKT) J14ARH J14ARH CERDIP (J), 14 LEAD (P/P DWG) P000230A P000230A CERDIP (J), 14 LEAD (PINOUT) See attached graphics following this page. 6 N MICROCIRCUIT DATA SHEET MNLM149-X MNLM149-X REV 0B1 Revision History Rev ECN # 0B1 M0002829 M0002829 10/23/98 Rel Date Originator Changes Barbara Lopez Update MDS: MNLM149-X MNLM149-X Rev. 0B0 to MNLM149-X MNLM149-X Rev. 0B1. Updated Burn-in graphic and added pinout. 7