KAF-5060PBGSEEVGAC DSAH7142 AUG/25/2007

PRELIMINARY SPEC Part Number: KAF-5060PBGSEEVGAC ATTENTION Blue Hyper Orange Green OBSERVE PRECAUTIONS FOR HANDLING ELECTROSTATIC

5.0mm x 6.0mm FULL COLOR LED LAMP PRELIMINARY SPEC Part Number: KAF-5060PBGSEEVGAC KAF-5060PBGSEEVGAC ATTENTION Blue Hyper Orange Green OBSERVE PRECAUTIONS FOR HANDLING ELECTROSTATIC DISCHARGE SENSITIVE DEVICES Features Description OUTSTANDING MATERIAL EFFICIENCY. The Blue source color devices are made with InGaN on SiC RELIABLE AND RUGGED. Light Emitting Diode. WATER CLEAR LENS. The Hyper Orange source color devices are made with LOW POWER CONSUMPTION. InGaAlP on GaAs substrate Light Emitting Diode. ONE BLUE, ONE ORANGE AND ONE GREEN CHIPS IN The Green source color devices are made with InGaN on G-SiC Light Emitting Diode. ONE PACKAGE. CAN PRODUCE ANY COLOR IN VISIBLE SPECTRUM, Static electricity and surge damage the LEDS. It is recommended to use a wrist band or anti-electrostatic INCLUDING WHITE LIGHT. MOISTURE SENSITIVITY LEVEL : LEVEL 4. glove when handling the LEDs. RoHS COMPLIANT All devices, equipment and machinery must be electrically grounded. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.25(0.01") unless otherwise noted. 3. Lead spacing is measured where the leads emerge from the package. 4. Specifications are subject to change without notice. SPEC NO: DSAH7142 DSAH7142 APPROVED: WYNEC REV NO: V.1 CHECKED: Allen Liu DATE: AUG/25/2007 AUG/25/2007 DRAWN: W.J.Hua PAGE: 1 OF 5 ERP: 1201002718 Selection Guide Part No. Dice Lens Type Iv (mcd) [2] @ 30mA *50mA Min. 180 KAF-5060PBGSEEVGAC KAF-5060PBGSEEVGAC WATER CLEAR Hyper Orange (InGaAlP) Green (InGaN) 300 *650 *1000 180 Blue (InGaN) Typ. Viewing Angle [1] 21/2 350 100° Notes: 1. 1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. 2. *Luminous intensity with asterisk is measured at 50mA; Luminous intensity/ luminous Flux: +/-15%. Electrical / Optical Characteristics at TA=25°C Symbol Parameter Device Typ. peak Peak Wavelength Blue Hyper Orange Green D [1] Dominant Wavelength 1/2 Max. Units Test Conditions 468 630 520 nm IF=20mA Blue Hyper Orange Green 470 621 525 nm IF=20mA Spectral Line Half-width Blue Hyper Orange Green 21 20 35 nm IF=20mA C Capacitance Blue Hyper Orange Green 100 25 100 pF VF=0V;f=1MHz VF [2] Forward Voltage Blue Hyper Orange Green 3.2 2 3.2 4 2.5 4 V IF=20mA IR Reverse Current Blue Hyper Orange Green 10 10 10 uA VR=5V Notes: 1.Wavelength: +/-1nm. 2. Forward Voltage: +/-0.1V. Absolute Maximum Ratings at TA=25°C Parameter Blue Power dissipation[2] Hyper Orange Green 350 Units mW DC Forward Current 30 50 30 mA Peak Forward Current [1] 100 195 100 mA Reverse Voltage 5 Operating / Storage Temperature -40°C To +85°C Lead Solder Temperature [3] 260°C For 3 Seconds Lead Solder Temperature [4] V 260°C For 5 Seconds Notes: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. 2. Within 350mW at all chips are lightened. 3. 2mm below package base. 4. 5mm below package base. SPEC NO: DSAH7142 DSAH7142 APPROVED: WYNEC REV NO: V.1 CHECKED: Allen Liu DATE: AUG/25/2007 AUG/25/2007 DRAWN: W.J.Hua PAGE: 2 OF 5 ERP: 1201002718 KAF-5060PBGSEEVGAC KAF-5060PBGSEEVGAC Blue SPEC NO: DSAH7142 DSAH7142 APPROVED: WYNEC REV NO: V.1 CHECKED: Allen Liu DATE: AUG/25/2007 AUG/25/2007 DRAWN: W.J.Hua PAGE: 3 OF 5 ERP: 1201002718 Hyper Orange SPEC NO: DSAH7142 DSAH7142 APPROVED: WYNEC REV NO: V.1 CHECKED: Allen Liu DATE: AUG/25/2007 AUG/25/2007 DRAWN: W.J.Hua PAGE: 4 OF 5 ERP: 1201002718 Green SPEC NO: DSAH7142 DSAH7142 APPROVED: WYNEC REV NO: V.1 CHECKED: Allen Liu DATE: AUG/25/2007 AUG/25/2007 DRAWN: W.J.Hua PAGE: 5 OF 5 ERP: 1201002718