KA-9219/2SRC DSAD0354 MAR/20/2005

KA-9219/2SRC Features SUPER BRIGHT RED Description LOW POWER CONSUMPTION. The Super Bright Red source color devices are made with

9.2mmX1.9mm BACKLIGHT KA-9219/2SRC KA-9219/2SRC Features SUPER BRIGHT RED Description LOW POWER CONSUMPTION. The Super Bright Red source color devices are made with IDEAL FOR BACKLIGHTING. Gallium Aluminum Arsenide Red Light Emitting Diode. RoHS COMPLIANT. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.25(0.01") unless otherwise noted. 3. Lead spacing is measured where the leads emerge from the package. 4. Specifications are subject to change without notice. SPEC NO: DSAD0354 DSAD0354 REV NO: V.5 DATE: MAR/20/2005 MAR/20/2005 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: B.H.LI PAGE: 1 OF 3 Selection Guide Part No. Dice Iv (mcd) @ 20mA Lens Type Viewing Angle Min. KA-9219/2SRC KA-9219/2SRC SUPER BRIGHT RED (GaAlAs) 21/2 70 WATER CLEAR Typ. 200 100° Note: 1. 1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. Electrical / Optical Characteristics at TA=25°C Symbol Parameter Device Typ. peak Peak Wavelength Super Bright Red D Dominant Wavelength 1/2 Max. Units Test Conditions 660 nm IF=20mA Super Bright Red 640 nm IF=20mA Spectral Line Half-width Super Bright Red 20 nm IF=20mA C Capacitance Super Bright Red 45 pF VF=0V;f=1MHz VF Forward Voltage Super Bright Red 3.7 5 V IF=20mA IR Reverse Current Super Bright Red 10 uA VR = 5V Absolute Maximum Ratings at TA=25°C Parameter Super Bright Red Units Power dissipation 150 mW DC Forward Current 30 mA Peak Forward Current [1] 155 mA 5 V Reverse Voltage Operating/Storage Temperature -40°C To +85°C Lead Solder Temperature [2] 260°C For 3 Seconds Lead Solder Temperature [3] 260°C For 5 Seconds Notes: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. 2. 2mm below package base. 3. 5mm below package base. SPEC NO: DSAD0354 DSAD0354 REV NO: V.5 DATE: MAR/20/2005 MAR/20/2005 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: B.H.LI PAGE: 2 OF 3 Super Bright Red KA-9219/2SRC KA-9219/2SRC Remarks: If special sorting is required (e.g. binning based on forward voltage, luminous intensity, or wavelength), the typical accuracy of the sorting process is as follows: 1. Wavelength: +/-1nm 2. Luminous Intensity: +/-15% 3. Forward Voltage: +/-0.1V Note: Accuracy may depend on the sorting parameters. SPEC NO: DSAD0354 DSAD0354 REV NO: V.5 DATE: MAR/20/2005 MAR/20/2005 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: B.H.LI PAGE: 3 OF 3