I2110 80EPF 80EPF02 80EPF04 80EPF06

QUIETIR Series 80EPF. FAST SOFT RECOVERY RECTIFIER DIODE VF < 1.1V @ 40A trr = 70ns VRRM 200 to 600V The 80EPF. fast soft

Bulletin I2110 I2110 rev. B 04/99 QUIETIR Series 80EPF 80EPF. FAST SOFT RECOVERY RECTIFIER DIODE VF < 1.1V @ 40A trr = 70ns VRRM 200 to 600V The 80EPF 80EPF. fast soft recovery QUIETIR rectifier series has been optimized for combined short reverse recovery time and low forward voltage drop. The glass passivation ensures stable reliable operation in the most severe temperature and power cycling conditions. Typical applications are both: output rectification and freewheeling in inverters, choppers and converters and input rectifications where severe restrictions on conducted EMI should be met. Package Outline Major Ratings and Characteristics Description/Features Characteristics 80EPF 80EPF. Units IF(AV) Sinusoidal waveform 80 A 200 to 600 V 1000 A VRRM range IFSM VF @ 40 A, TJ = 25°C 1.1 V trr @ 1A, - 100A/µs 70 ns TJ range - 40 to 150 °C Document Number: 93156 TO-247AC www.vishay.com 1 80EPF 80EPF. QUIETIR Series Bulletin I2110 I2110 rev. A 06/97 Voltage Ratings Part Number VRRM , maximum peak reverse voltage V VRSM , maximum non repetitive peak reverse voltage V IRRM 150°C mA 80EPF02 80EPF02 200 300 17 80EPF04 80EPF04 400 500 80EPF06 80EPF06 600 700 Absolute Maximum Ratings Parameters IF(AV) Max. Average Forward Current IFSM Max. Peak One Cycle Non-Repetitive 80EPF 80EPF. Units 80 A 850 A Surge Current I2t 1000 Max. I2 t for fusing 3610 2 Max. I t for fusing 10ms Sine pulse, rated V RRM applied 10ms Sine pulse, no voltage reapplied 2 s 5100 I 2t Conditions @ T C = 95° C, 180° conduction half sine wave 10ms Sine pulse, rated VRRM applied 10ms Sine pulse, no voltage reapplied 2 51000 A s 80EPF 80EPF. Units 1.25 V t = 0.1 to 10ms, no voltage reapplied Electrical Specifications Parameters VFM Max. Forward Voltage Drop rt Forward slope resistance 3.5 m VF(TO) Threshold voltage 0.85 V IRM 0.1 Max. Reverse Leakage Current mA 17 Conditions @ 80A, T J = 25°C TJ = 125°C TJ = 25 °C TJ = 150 °C VR = rated VRRM Recovery Characteristics Parameters Conditions 80EPF 80EPF. Units t rr Reverse Recovery Time 190 ns I F @ 40Apk Irr Reverse Recovery Current 3.4 A @ 25A/ µs Qrr Reverse Recovery Charge 0.5 µC S Snap Factor 0.5 Document Number: 93156 @ 25°C IFM trr t di dt Qrr IRM (REC) www.vishay.com 2 80EPF 80EPF. QUIETIR Series Bulletin I2110 I2110 rev. A 06/97 Thermal-Mechanical Specifications Parameters 80EPF 80EPF. Units TJ Max. Junction Temperature Range - 40 to 150 °C Tstg Max. Storage Temperature Range - 40 to 150 °C 0.35 °C/W 40 °C/W 0.2 °C/W Conditions RthJC Max. Thermal Resistance Junction to Case RthJA Max. Thermal Resistance Junction to Ambient RthCS Typical Thermal Resistance, Case to Heatsink wt Approximate Weight T Mounting Torque 6 (0.21) 6 (5) Max. 12 (10) Kg-cm (Ibf-in) TO-247AC 150 80EPF 80EPF. Series R (DC) = 0.35 K/W 140 thJC 130 Conduction Angle 120 110 100 90° 90 60° 120° 30° 180° 80 10 20 30 40 50 60 70 80 90 Maximum Allowable Case Temperature (°C) Maximum Allowable Case Temperature (°C) Case Style 0 Mounting surface , smooth and greased g (oz.) Min. DC operation 150 80EPF 80EPF. Series R thJC (DC) = 0.35 K/W 140 130 Conduction Period 120 110 100 90 60° 30° 0 180° 120° 90° 60° 30° RMS Limit 60 Conduction Angle 40 80EPF 80EPF. Series T J = 150°C 20 0 0 10 20 30 40 50 60 70 80 90 Average Forward Current (A) Fig. 3 - Forward Power Loss Characteristics Document Number: 93156 20 40 60 80 100 120 140 Fig. 2 - Current Rating Characteristics Maximum Average Forward Power Loss (W) Maximum Average Forward Power Loss (W) 140 80 DC Average Forward Current (A) Fig. 1 - Current Rating Characteristics 100 180° 80 Average Forward Current (A) 120 90° 120° 180 DC 180° 120° 90° 60° 30° 160 140 120 100 80 RMS Limit 60 Conduction Period 40 80EPF 80EPF. Series T J = 150°C 20 0 0 20 40 60 80 100 120 140 Average Forward Current (A) Fig. 4 - Forward Power Loss Characteristics www.vishay.com 3 80EPF 80EPF. QUIETIR Series 1000 At Any Rated Load Condition And With Rated V RRM Applied Following Surge. Initial TJ = 150°C @ 60 Hz 0.0083 s @ 50 Hz 0.0100 s 900 800 Peak Half Sine Wave Forward Current (A) Peak Half Sine Wave Forward Current (A) Bulletin I2110 I2110 rev. A 06/97 700 600 500 400 80EPF 80EPF. Series 300 200 1 10 100 1000 Maximum Non Repetitive Surge Current Versus Pulse Train Duration. Initial T J = 150°C No Voltage Reapplied Rated V Reapplied 900 800 RRM 700 600 500 400 300 80EPF 80EPF. Series 200 0.01 0.1 Number Of Equal Amplitude Half Cycle Current Puls es (N) 1 Pulse Train Duration (s) Fig. 6 - Maximum Non-Repetitive Surge Current Fig. 5 - Maximum Non-Repetitive Surge Current Instantaneous Forward Current (A) 1000 100 TJ = 25°C TJ = 150°C 10 80EPF 80EPF. Series 1 0 0.5 1 1.5 2 2.5 3 3.5 4 Instantaneous Forward Voltage (V) 0.22 Maximum Reverse Recovery Time - Trr (µs) Maximum Reverse Recovery Time - Trr (µs) Fig. 7 - Forward Voltage Drop Characteristics I FM = 125 A 80 A 0.2 40 A 0.18 0.16 20 A 0.14 10 A 0.12 0.1 0.08 1A 80EPF 80EPF. Series T J = 25°C 0.06 0.04 0 40 80 120 160 200 Rate Of Fall Of Forward Current - di/dt (A/µs) Fig. 8 - Recovery Time Characteristics, T J = 25°C Document Number: 93156 0.6 80EPF 80EPF. Series T J = 150°C 0.5 I FM = 80 A 0.4 40 A 0.3 20 A 10 A 0.2 1A 0.1 0 0 40 80 120 160 200 Rate Of Fall Of Forward Current - di/dt (A/µs) Fig. 9 - Recovery Time Characteristics, TJ = 150°C www.vishay.com 4 80EPF 80EPF. QUIETIR Series 4 80EPF 80EPF. Series T J = 25°C 3.5 Maximum Reverse Recovery Charge - Qrr (µC) Maximum Reverse Recovery Charge - Qrr (µC) Bulletin I2110 I2110 rev. A 06/97 IFM = 125 A 80 A 3 40 A 2.5 20 A 2 1.5 10 A 1 0.5 1A 0 0 40 80 120 160 200 14 8 20 A 4 10 A 2 1A 0 0 18 Maximum Reverse Recovery Current - Irr (A) Maximum Reverse Recovery Current - Irr (A) J 80 A 40 A 16 20 A 14 12 10 A 10 8 6 1A 4 2 0 0 40 80 120 160 200 Rate Of Fall Of Forward Current - di/dt (A/µs) 80 120 160 200 45 I FM = 80 A 80EPF 80EPF. Series T J = 150°C 40 35 40 A 30 25 20 A 20 10 A 15 10 1A 5 0 0 40 80 120 160 200 Rate Of Fall Of Forward Current - di/dt (A/µs) Fig. 12 - Recovery Current Characteristics, TJ = 25°C Transient Thermal Impedance Z thJC (K/W) 40 Fig. 11 - Recovery Charge Characteristics, TJ = 150°C I FM = 125 A 80EPF 80EPF. Series T = 25°C 40 A 6 Rate Of Fall Of Forward Current - di/dt (A/µs) 22 20 I FM = 80 A 10 Rate Of Fall Of Forward Current - di/dt (A/µs) Fig. 10 - Recovery Charge Characteristics, TJ = 25°C 80EPF 80EPF. Series T J = 150°C 12 Fig. 13 - Recovery Current Characteristics, TJ = 150°C 1 Steady State Value (DC Operation) 0.1 D= D= D= D= D= 0.50 0.33 0.25 0.17 0.08 Single Pulse 80EPF 80EPF. Series 0. 01 0.0001 0.001 0.01 0.1 1 10 Square Wave Pulse Duration (s) Fig. 14 - Thermal Impedance ZthJC Characteristics Document Number: 93156 www.vishay.com 5 80EPF 80EPF. QUIETIR Series Bulletin I2110 I2110 rev. A 06/97 Outline Table 3. 65 (0 .14 4) 15 .90 (0 .626 ) 3. 55 (0 .13 9) DIA. 15 .30 (0 .602 ) 5. 30 (0.20 9) 4.70 (0.185) 2.5 ( 0.098) 1.5 ( 0.059) 5. 70 (0.22 5) 5.30 (0.208) 20 .30 (0 .800 ) 19 .70 (0 .775 ) 5.50 ( 0.217) 4. 50 (0.17 7) 1 2 (2 PLCS.) 3 14.80 ( 0.583) 4. 30 (0 .17 0) 14 .20 ( 0 .559 ) 3. 70 (0 .14 5) 2. 20 (0 .087) 1.40 ( 0 .05 6) 2. 40 (0 .095) M AX . M AX . 1.00 (0 .03 9) 0.80 ( 0.032) 0. 40 (0 .21 3) 10. 94 ( 0.430) 10.86 (0 .427 ) Dimensions in millimeters and inches Ordering Information Table Device Code 80 P F 2 3 4 Base Cathode BASE 2 CATHODE 06 1 5 4 3 2 1 E 5 Voltage code: Type of Silicon: Package: Circuit Configuration: Current Rating Code x 100 = V F Single Diode, P Fast Recovery E = TO-247AC 3 pins CATHODE 1 Anode ANODE 3 Anode 02 = 200V RRM 6 Document Number: 93156 04 = 400V 06 = 600V www.vishay.com 6 80EPF 80EPF. QUIETIR Series Bulletin I2110 I2110 rev. A 06/97 WORLD HEADQUARTERS: EUROPEAN HEADQUARTERS: IR CANADA: IR GERMANY: IR ITALY: IR FAR EAST: IR SOUTHEAST ASIA: IR TAIWAN: 233 Kansas St., El Segundo, California 90245 U.S.A. Tel: (310) 322 3331. Fax: (310) 322 3332. Hurst Green, Oxted, Surrey RH8 9BB, U.K. Tel: + 44 1883 732020. Fax: + 44 1883 733408. 15 Lincoln Court, Brampton, Markham, Ontario L6T3Z2. Tel: (905) 453 2200. Fax: (905) 475 8801. Saalburgstrasse 157, 61350 Bad Homburg. Tel: + 49 6172 96590. Fax: + 49 6172 965933. Via Liguria 49, 10071 Borgaro, Torino. Tel: + 39 11 4510111. Fax: + 39 11 4510220. K&H Bldg., 2F, 30-4 Nishi-Ikebukuro 3-Chome, Toshima-Ku, Tokyo, Japan 171. Tel: 81 3 3983 0086. 1 Kim Seng Promenade, Great World City West Tower,13-11, Singapore 237994. Tel: + 65 838 4630. 16 Fl. Suite D.207, Sec. 2, Tun Haw South Road, Taipei, 10673, Taiwan. Tel: 886 2 2377 9936. Data and specifications subject to change without notice. Document Number: 93156 www.vishay.com 7 Legal Disclaimer Notice Vishay Notice The products described herein were acquired by Vishay Intertechnology, Inc., as part of its acquisition of International Rectifier's Power Control Systems (PCS) business, which closed in April 2007. Specifications of the products displayed herein are pending review by Vishay and are subject to the terms and conditions shown below. Specifications of the products displayed herein are subject to change without notice. Vishay Intertechnology, Inc., or anyone on its behalf, assumes no responsibility or liability for any errors or inaccuracies. Information contained herein is intended to provide a product description only. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document. Except as provided in Vishay's terms and conditions of sale for such products, Vishay assumes no liability whatsoever, and disclaims any express or implied warranty, relating to sale and/or use of Vishay products including liability or warranties relating to fitness for a particular purpose, merchantability, or infringement of any patent, copyright, or other intellectual property right. The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications. Customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify Vishay for any damages resulting from such improper use or sale. International Rectifier®, IR®, the IR logo, HEXFET®, HEXSense®, HEXDIP®, DOL®, INTERO®, and POWIRTRAIN® are registered trademarks of International Rectifier Corporation in the U.S. and other countries. All other product names noted herein may be trademarks of their respective owners. Document Number: 99901 Revision: 12-Mar-07 www.vishay.com 1