0448G HN-0A10 MIL-STD-202 MIL-STD-883

Data Sheet 0448G Rev. C Sinewave Output HN-0A10 Series Description The HN-0A10 Series of quartz crystal oscillators provide

CRYSTAL CLOCK OSCILLATORS Data Sheet 0448G 0448G Rev. C Sinewave Output HN-0A10 HN-0A10 Series Description The HN-0A10 HN-0A10 Series of quartz crystal oscillators provide sinewave output signal. This device is to operate using positive voltage and uses multiple ground pins for improved signal integrity. Features · Wide frequency range - 10.0MHz to 100.0MHz · User specified tolerance available · Case at electrical ground · Will withstand SMD reflow temperatures of 253°C for 4 minutes maximum · All metal, resistance weld, hermetically sealed package · High shock resistance, to 1500g · High Reliability - NEL HALT/HASS qualified for crystal oscillator start-up conditions · High Q Crystal actively tuned oscillator circuit · Power supply decoupling internal · Dual ground plane for added stability · No internal PLL avoids cascading PLL problems · COTS/Dual use Electrical Connection Pin 1 2 7 8 9 10 15 16 Connection Vee (Gnd) Vcc NC Output Vee (Gnd) NC NC Vee (Gnd) Standoff locations and Package height are subject to change. 357 Beloit Street, P.O. Box 457, Burlington, WI 53105-0457 U.S.A. Phone 262/763-3591 FAX 262/763-2881 Email: nelsales@nelfc.com www.nelfc.com Data Sheet 0448G 0448G CRYSTAL CLOCK OSCILLATORS Rev. C HN-0A10 HN-0A10 Series Continued Sinewave Output Operating Conditions and Output Characteristics Electrical Characteristics Parameter Frequency Output Amplitude Frequency Stability(1) Aging Phase Noise Symbol Conditions -50 ohm load dF/F Overall conditions including: voltage, calibration, temp., 10 year aging, shock, vibration -First Year After first year -100Hz 1kHz 10kHz Min 10.0MHz 5.0dBm -100ppm Typical -7dBm - Max 100.0MHz 9.0dBm +100ppm - - ±3ppm ±2ppm -100dBc/Hz -125dBc/Hz -140dBc/Hz Conditions 5.0V±10% 15V - Min 4.5V 6.0V 0.0 mA 0°C -55°C Typical 5.0V 15.0V - Max 5.5V 25.0V 120 mA 70°C 125°C Soldering, 10 sec. 50 Ohm - - - 300°C - 2 ms 10 ms General Characteristics Parameter Supply Voltage Symbol VCC Supply Current ICC Operating temperature TA Storage temperature TS Input: Logic High (ECL) - Disables VEE or Open - Enables Lead temperature TL Load Start-up time tS Environmental and Mechanical Characteristics Mechanical Shock Thermal Shock Vibration Soldering Condition Hermetic Seal Per MIL-STD-202 MIL-STD-202, Method 213, Condition E Per MIL-STD-883 MIL-STD-883, Method 1011, Condition A 0.060" double amplitude 10 Hz to 55 Hz, 35g's 55Hz to 2000 Hz 300°C for 10 seconds Leak rate less than 1 x 10 -8 atm.cc/sec of helium Footnotes: 1) Standard frequency stability (±20, ±25, ±50ppm & others available) Creating a Part Number HN - _0A1X - FREQ Package Code HN Leaded 8 pin (16pin) SN 8 pin (16 pin) SMD Gull Wing Input Voltage Code Specification 5V E 15V Tolerance/Performance 0 ±100ppm 0-70°C 1 ±50ppm 0-70°C 7 ±25ppm 0-70°C 9 Customer Specific A ±20ppm 0-70°C B ±50ppm -40 to +85°C C ±100ppm -40 to +85°C 357 Beloit Street, P.O. Box 457, Burlington, WI 53105-0457 U.S.A. Phone 262/763-3591 FAX 262/763-2881 Email: nelsales@nelfc.com www.nelfc.com