HMC340LP5 340LP5E HMC340LP5E 340LP4E

v02.0108 GaAs MMIC SMT DOUBLE-BALANCED DUAL MIXER, 1.7 - 4.5 GHz Typical Applications The HMC340LP5 / HMC340LP5E Dual Mixer is

HMC340LP5 HMC340LP5 / 340LP5E 340LP5E v02.0108 GaAs MMIC SMT DOUBLE-BALANCED DUAL MIXER, 1.7 - 4.5 GHz Typical Applications The HMC340LP5 HMC340LP5 / HMC340LP5E HMC340LP5E Dual Mixer is ideal for: Conversion Loss: 8.0 dB · Wireless Infrastructure LO/IF Isolation: 33 dB · Wireless Local Loop 9 Features Input IP3: +20 dBm · Image Reject Mixer Conversion Gain Balance: 0.1 dB · I/Q Modulator 32 Lead 5x5mm SMT Package: 25mm2 LO/RF Isolation: 45 dB MIXERS - DBL-BAL - SMT · SSB Modulator Functional Diagram General Description The HMC340LP5 HMC340LP5(E) is a double balanced dual mixer covering 1.7 - 4.5 GHz RF/LO range. This passive MMIC mixer is constructed of GaAs Schottky diodes and on-chip baluns. The device can be used as an upconverter, downconverter, bi-phase (de)modulator, or phase comparator. The mixer symmetry of the HMC340LP5 HMC340LP5(E) make it ideal for combining with external hybrids to implement a single sideband upconverter or image reject downconverter assembly. The consistent MMIC performance will improve system operation and assure regulatory compliance. A RoHS compliant, leadless 5x5 mm QFN surface mount package (LP5) houses the dual MMIC mixer IC. Electrical Specifi cations, TA = +25° C, As a Function of LO Drive LO = +13 dBm IF = 100 MHz Parameter Min. Typ. Max. Min. Units Typ. Max. Frequency Range, RF & LO 1.7 - 4.5 3.4 - 3.8 GHz Frequency Range, IF DC - 1.5 DC - 1.5 GHz Conversion Loss 8 8 10 dB 0.25 0.10 0.25 dB 8 Noise Figure (SSB) 10 0.10 Conversion Gain Amplitude Balance 10 8 10 dB LO to RF Isolation 30 45 40 47 LO to IF Isolation 25 33 33 38 dB dB IP3 (Input) 20 23 dBm 1 dB Gain Compression (Input) 12 13 dBm * Unless otherwise noted, all measurements performed as single channel downconverter. 9 - 202 For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com HMC340LP5 HMC340LP5 / 340LP4E 340LP4E v02.0108 GaAs MMIC SMT DOUBLE-BALANCED DUAL MIXER, 1.7 - 4.5 GHz Single Channel: Conversion Gain vs. Temperature @ LO = +13 dBm Single Channel: Isolation @ LO = +13 dBm 0 RF TO IF LO TO RF LO TO IF -15 -10 +25C +85C -40C -15 -30 9 -45 -20 -60 1 1.5 2 2.5 3 3.5 4 4.5 5 1 1.5 2 RF FREQUENCY (GHz) 3 3.5 4 4.5 5 4.5 5 4.5 5 FREQUENCY (GHz) Single Channel: Conversion Gain vs. LO Drive Single Channel: Return Loss @ LO = +13 dBm 0 -5 -5 RETURN LOSS (dB) 0 CONVERSION GAIN (dB) 2.5 -10 LO= +9 dBm LO= +11 dBm LO= +13 dBm LO= +15 dBm -15 -10 LO RF -15 -20 -20 1 1.5 2 2.5 3 3.5 4 4.5 1 5 1.5 2 2.5 3 3.5 4 MIXERS - DBL-BAL - SMT -5 ISOLATION (dB) CONVERSION GAIN (dB) 0 FREQUENCY (GHz) RF FREQUENCY (GHz) Single Channel: Input P1dB vs. Temperature @ LO = +13 dBm Single Channel: IF Bandwidth @ LO = +13 dBm 0 15 14 13 P1dB (dBm) RESPONSE (dB) -5 -10 11 10 RETURN LOSS CONVERSION GAIN -15 12 +25C +85C -40C 9 -20 8 0 0.5 1 1.5 IF FREQUENCY (GHz) 2 1 1.5 2 2.5 3 3.5 4 RF FREQUENCY (GHz) For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com 9 - 203 HMC340LP5 HMC340LP5 / 340LP4E 340LP4E v02.0108 GaAs MMIC SMT DOUBLE-BALANCED DUAL MIXER, 1.7 - 4.5 GHz Single Channel: Input IP3 vs. Temperature @ LO = +13 dBm Single Channel: Input IP3 vs. LO Drive IP3 (dBm) 25 20 LO= +11dBm LO= +13dBm LO= +15dBm 15 10 1.5 2 2.5 3 3.5 4 20 +25C +85C -40C 15 4.5 10 1.5 5 2 2.5 RF FREQUENCY (GHz) 3.5 4 4.5 5 Single Channel: Input IP2 vs. Temperature @ LO = +13 dBm 60 70 65 55 60 50 IP2 (dBm) 55 50 45 +25C +85C -40C 40 40 LO= +11dBm LO= +13dBm LO= +15dBm 35 30 1.5 45 2 2.5 3 3.5 4 35 4.5 30 1.5 5 2 2.5 RF FREQUENCY (GHz) 3.5 4 4.5 5 4.5 5 Single Channel: Upconverter IP3 vs. LO Drive 30 0 25 -5 IP3 (dBm) CONVERSION GAIN (dB) 3 RF FREQUENCY (GHz) Single Channel: Upconverter Conversion Gain vs. LO Drive -10 LO= +9dBm LO= +11dBm LO= +13dBm LO= +15dBm -15 -20 1.5 2 2.5 3 3.5 20 15 LO= +11dBm LO= +13dBm LO= +15dBm 10 4 RF FREQUENCY (GHz) 9 - 204 3 RF FREQUENCY (GHz) Single Channel: Input IP2 vs. LO Drive IP2 (dBm) MIXERS - DBL-BAL - SMT 9 30 25 IP3 (dBm) 30 4.5 5 5 1.5 2 2.5 3 3.5 4 RF FREQUENCY (GHz) For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com HMC340LP5 HMC340LP5 / 340LP4E 340LP4E v02.0108 GaAs MMIC SMT DOUBLE-BALANCED DUAL MIXER, 1.7 - 4.5 GHz Dual Channel: Conversion Gain Amplitude Balance Dual Channel: Channel to Channel Isolation -60 0.5 -70 0 RF1 TO IF2 RF2 TO IF1 -80 9 -90 -0.5 -1 1 2 3 4 5 -100 1.5 2 2.5 FREQUENCY (GHz) 4 4.5 5 4.5 5 Dual Channel: RF1 to RF2 Isolation -20 -30 -30 ISOLATION (dB) -20 -40 -50 -60 -40 -50 -60 -70 1.5 2 2.5 3 3.5 4 4.5 5 -70 1.5 2 LO FREQUENCY (GHz) 2.5 3 3.5 4 RF FREQUENCY (GHz) Dual Channel: IF1 to IF2 Isolation Harmonics of LO -20 LO Freq. (GHz) 1.5 -40 ISOLATION (dB) 3.5 RF FREQUENCY (GHz) Dual Channel: LO1 to LO2 Isolation ISOLATION (dB) 3 nLO Spur at RF Port 1 2 3 4 46 33 66 58 2.0 1 1.5 2 36 57 76 50 44 57 74 43 48 57 65 37 54 64 78 5.0 IF FREQUENCY (GHz) 69 55 4.5 0.5 64 47 4.0 -100 53 29 3.5 -80 28 46 3.0 -60 41 2.5 0 MIXERS - DBL-BAL - SMT ISOLATION (dB) AMPLITUDE BALANCE (dB) 1 33 53 69 81 LO = +13 dBm Values in dBc below input LO level measured at RF Port. For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com 9 - 205 HMC340LP5 HMC340LP5 / 340LP4E 340LP4E v02.0108 GaAs MMIC SMT DOUBLE-BALANCED DUAL MIXER, 1.7 - 4.5 GHz Absolute Maximum Ratings RF / IF Input +27 dBm Channel Temperature 150°C Continuous Pdiss (T = 85°C) (derate 16.55 mW/°C above 85°C) 1.07 W mRF 0 1 2 3 4 0 xx 8 22 22 39 39 1 60.4 °C/W Storage Temperature -65 to +150 °C -40 to +85 deg °C 15 0 47 42 2 75 68 75 69 71 3 76 76 77 73 77 4 Thermal Resistance (RTH) (junction to package base) Operating Temperature MIXERS - DBL-BAL - SMT nLO +13 dBm LO Drive 9 MxN Spurious Outputs 76 77 76 76 76 RF = 3.5 GHz @ -10 dBm LO = 3.6 GHz @ +13 dBm All values in dBc below IF power level ELECTROSTATIC SENSITIVE DEVICE OBSERVE HANDLING PRECAUTIONS Outline Drawing NOTES: 1. LEADFRAME MATERIAL: COPPER ALLOY 2. DIMENSIONS ARE IN INCHES [MILLIMETERS] 3. LEAD SPACING TOLERANCE IS NON-CUMULATIVE. 4. PAD BURR LENGTH SHALL BE 0.15mm MAXIMUM. PAD BURR HEIGHT SHALL BE 0.05mm MAXIMUM. 5. PACKAGE WARP SHALL NOT EXCEED 0.05mm. 6. ALL GROUND LEADS AND GROUND PADDLE MUST BE SOLDERED TO PCB RF GROUND. 7. REFER TO HITTITE APPLICATION NOTE FOR SUGGESTED LAND PATTERN. Package Information Part Number Package Body Material Lead Finish MSL Rating HMC340LP5 HMC340LP5 Low Stress Injection Molded Plastic Sn/Pb Solder MSL1 HMC340LP5E HMC340LP5E RoHS-compliant Low Stress Injection Molded Plastic 100% matte Sn MSL1 Package Marking [3] [1] H340 XXXX [2] H340 XXXX [1] Max peak reflow temperature of 235 °C [2] Max peak reflow temperature of 260 °C [3] 4-Digit lot number XXXX 9 - 206 For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com HMC340LP5 HMC340LP5 / 340LP4E 340LP4E v02.0108 GaAs MMIC SMT DOUBLE-BALANCED DUAL MIXER, 1.7 - 4.5 GHz Pin Descriptions Function Description 1, 2, 4, 5, 7-11, 13-18, 20, 21, 23-28, 30-32 N/C No Connection. These pins may be connected to RF ground without affecting performance. 3, 6 LO1, LO2 LO Port: This pin is DC coupled and matched to 50 Ohms. 12, 29 IF2, IF1 IF Port: This pin is DC coupled. For applications not requiring operation to DC, this port should be DC blocked externally using a series capacitor whose values has been chosen to pass the necessary IF frequency range. For operation to DC, this pin must not source/sink more than 4mA of current or die non-function and possible die failure will result. 19, 22 RF2, RF1 RF Port: This pin is DC coupled and matched to 50 Ohms. Package Bottom GND Interface Schematic Package bottom must be connect to RF/DC ground. For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com 9 MIXERS - DBL-BAL - SMT Pin Number 9 - 207 HMC340LP5 HMC340LP5 / 340LP4E 340LP4E v02.0108 GaAs MMIC SMT DOUBLE-BALANCED DUAL MIXER, 1.7 - 4.5 GHz Application Circuit for use as an I/Q Modulator MIXERS - DBL-BAL - SMT 9 9 - 208 Application Circuit for use as an IRM Mixer For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com HMC340LP5 HMC340LP5 / 340LP4E 340LP4E v02.0108 GaAs MMIC SMT DOUBLE-BALANCED DUAL MIXER, 1.7 - 4.5 GHz Evaluation PCB MIXERS - DBL-BAL - SMT 9 List of Materials for Evaluation PCB 107482 [1] Item Description J1 - J6 PCB Mount SMA RF Connector U1 HMC340LP5 HMC340LP5 / HMC340LP5E HMC340LP5E Dual Mixer PCB [2] 107467 Evaluation Board [1] Reference this number when ordering complete evaluation PCB [2] Circuit Board Material: Rogers 4350 The circuit board used in the final application should use RF circuit design techniques. Signal lines should have 50 Ohm impedance while the package ground leads and exposed paddle should be connected directly to the ground plane similar to that shown. A sufficient number of via holes should be used to connect the top and bottom ground planes. The evaluation circuit board shown is available from Hittite upon request. For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com 9 - 209