IEC60950 EN60950 UL1950/ FTR-C1CA03G C1CA03G FTR-C1GA003G-B05 003-G 005-G 012-G - Datasheet Archive

 

ULTRA MINIATURE RELAY SIGNAL RELAY FTR-C1 Series s FEATURES q q q q Dimensions of large contact gap relay Height: 9.3 mm maximum

 

FTR-C1 Series ULTRA MINIATURE RELAY SIGNAL RELAY FTR-C1 Series s FEATURES q q q q Dimensions of large contact gap relay Height: 9.3 mm maximum (THT) 9.65 mm maximum (SMT) Length: 15 mm maximum Width: 7.5 mm maximum Conforms to IEC60950 IEC60950 / EN60950 EN60950 / UL1950/ UL1950/ C22.2 No.950 spacing & high breakdown voltage Clearance: 2.0 mm ( coil and contacts) Creepage: 2.5 mm ( coil and contacts) HIGH RELIABILITY Bifurcated contacts Low power consumption 280 mW (latching type 140mW) s ORDERING INFORMATION [Example] FTR-C1 (a) C A 012 G TL * (b) (c) (d) (e) (f) (a) Series Name FTR-C1 (b) Terminal Appearance C: Through hole type G: Surface mount type (c) Operation Function A: Standard Type B: Single coil latching type (d) Coil Number Nominal Voltage (e) Contact Material G: Silver alloy (f) Option No TL: Dielectric strength (b/w open contacts) 1000 VAC 1 minute Remarks: Actual marking on relay would not carry code FTR and be as below: Ordering code Actual marking FTR-C1CA03G FTR-C1CA03G C1CA03G C1CA03G * If ordering tape and reel package, please add "B05" after the partnumber (tape and reel is only available for SMT type, example: FTR-C1GA003G-B05 FTR-C1GA003G-B05 1 FTR-C1 Series s COIL DATA CHART Standard type Nominal Voltage Model THT FTR-C1(G)(A)003-G 003-G Must Operate Voltage Must Release Voltage Nominal Operating Power (±10%) 3 VDC 32.1 2.25 VDC 0.3 VDC 280 mW 4.5 VDC 72.3 3.38 VDC 0.45 VDC 280 mW SMT FTR-C1(C)(A)003-G 003-G Coil Resistance (±10%) FTR-C1(C)(A)04.5-G FTR-C1(G)(A)04.5-G FTR-C1(C)(A)005-G 005-G FTR-C1(G)(A)005-G 005-G 5 VDC 89.3 3.75 VDC 0.5 VDC 280 mW FTR-C1(C)(A)012-G 012-G FTR-C1(G)(A)012-G 012-G 12VDC 12VDC 514 9.00 VDC 1.2 VDC 280 mW FTR-C1(C)(A)024-G 024-G FTR-C1(G)(A)024-G 024-G 24VDC 24VDC 1920 18.0 VDC 2.4 VDC 300 mW Set Voltage Reset Voltage Nominal Operating Power (±10%) Note: All values in the table are measured at 20°C. Single coil latching type Model Nominal Voltage THT SMT FTR-C1(C)(B)003-G 003-G FTR-C1(C)(B)003-G 003-G FTR-C1(C)(B)04.5-G FTR-C1(C)(B)04.5-G 3 VDC 4.5 VDC Coil Resistance (±10%) 2.25 VDC 2.25 VDC 140 mW 145 3.38 VDC 3.38 VDC 140 mW 64 FTR-C1(C)(B)005-G 005-G FTR-C1(C)(B)005-G 005-G 5 VDC 179 3.75 VDC 3.75 VDC 140 mW FTR-C1(C)(B)012-G 012-G FTR-C1(C)(B)012-G 012-G 12VDC 12VDC 1029 9.00 VDC 9.00 VDC 140 mW FTR-C1(C)(B)024-G 024-G FTR-C1(C)(B)024-G 024-G 24VDC 24VDC 3200 18.0 VDC 18.0 VDC 180 mW Note: - All values in the table are measured at 20°C. - Single coil latching type is applying to the standard now. 2 FTR-C1 Series s SPECIFICATIONS FTR-C1CA ( )G FTR-C1GA ( )G Item FTR-C1CA ( )G-TL FTR-C1GA ( )G-TL Arrangement 2 Form C Material Silver alloy Resistance (initial) Max. 100m ohm (at 1A 6VDC) Max. Switching Power 37.5AV / 30W Max. Switching Voltage 250VAC 250VAC, 220 VDC Max. Switching Current 1A Operating Temperature -40° C to + 85° C (no frost) Max. Allowable Voltage 150% nominal voltage (at 20° C) Operate Time Max. 10ms (at nominal voltage, without bounce) Release Time (without diode) Max. 10ms (at nominal voltage, without bounce) Resistance (at 500 VDC) Min. 1,000M ohmS Contact Coil Time Value Between open contacts 3,000VAC 000VAC, 1 minute 2,500V (at 2/10 microsec) Between adjacent contacts 2,500V (at 2/10 microsec) Between coil and contacts Surge Strength 1,500VAC 500VAC, 1 minute Between open contacts Insulation Between adjacent contacts Between coil and contacts Dieelectric Strenght 1,500VAC 500VAC, 1 minute 1,000VAC 000VAC, 1 minute 5,000V (at 2/10 microsec) Mechanical 10x106 operations min. (at 10Hz) Electrical (resistive load) 100x103 operations min. at 1A, 30VDC 30VDC, 0.5Hz 100x103 operations min. at 0.1A, 48VDC 48VDC, 0.5Hz 100x103 operations min. at 0.3A, 125VDC 125VDC, 0.5Hz Vibration Resistance Misoperation 10 to 55 Hz at double amplitude of 3.3 mm Endurance 10 to 55 Hz at double amplitude of 5 mm Shock Resistance Misoperation Min. 500 m/s2 Endurance Min. 1,000 m/s2 UL / CSA Contact Rating 0.3A 125 VAC 1A 30VDC 30VDC 0.3 110VDC 110VDC Insulation Class Supplementary Insulation Working Voltage 250 V Pollution Degree 2 Clearance 2.0 mm (between coil and contacts) Creepage Distance 2.5 mm (between coil and contacts) Life IEC060950 IEC060950 UL1950 UL1950 C22.2 No.950 EN60950 EN60950 3 FTR-C1 Series s DIMENSIONS AND SCHEMATICS Through hole type Polarity Bar Japan 7.5 max. F.T. C1CA003G C1CA003G 0031K 0031K 9.35 Max. 15 max. 3.5 Unit: mm 5.08 ±0.2 (1.16) 2.54±0.2 s RECOMMENDED MOUNTING PAD s TERMINAL DESIGNATIONS 8-ø0.8 +0.1 -0.05 Standard type (Bottom view de-energized position) 3 4 5 10 9 8 5.08 ±0.1 (+) 1 5.08 ±0.2 2.54±0.2 (1.16) (1.1) (-) 12 Polarity Bar (1.1) Single Coil Latching type (Bottom view reset position) (+) (-) 1 3 4 2.54±0.1 5 S shows the polarity of set positin R shows the polarity of reset position S R (+).(+) 12 Polarity Bar 5.08 ±0.1 2.54±0.1 10 9 8 Unit: mm 4 FTR-C1 Series s DIMENSIONS AND SCHEMATICS Surface mount type Polarity Bar Japan 7.5 max. F.T. C1GA003G C1GA003G 0031K 0031K 0.2+0.3 9.65 Max. 15 max. (1.1) 2.54±0.2 5.08 ±0.2 2.54±0.2 3°±2° 5.08 ±0.2 Unit: mm 9+0.3 s TERMINAL DESIGNATIONs s RECOMMENDED MOUNTING PAD 3 9 8 5 10 9 8 S R (+) (-) 1 Polarity Bar 5.08 ±0.1 2.54±0.1 4 Single Coil Latching type (Bottom view reset position) (-) (+) 12 1±0.1 7.02±0.1 (+) 1 Polarity Bar 10 2.73 ±0.1 (-) 12 1±0.1 1±0.1 2.73 ±0.1 Standard type (Top view de-energized position) 2.54±0.1 S shows the polarity of set positin R shows the polarity of reset position 3 5 4 Unit: mm 5 FTR-C1 Series s RECOMMENDED SOLDERING CONDITIONS (TEMPERATURE PROFILE) IRS (Infrared Reflow Soldering) Temperature (°C) Note: soldering T3 T 3 = 245°C max. T 2 = 200°C max. cooling T 1 = 165°C max. T2 T1 0 1.Temperature profiles show the temperature of PC board surface. 2. Please perform soldering test with your actual PC board before mass production, since the temperatures of PC board surfaces vary according to the size of PC board, status of parts mounting and heating method. preheating 120 sec maximum 30 sec Max. s PACKAGING Packaging method (only tape packaging is available) 1. Taping standards: JIS C 0806 and RC-10092B RC-10092B (EIAJ) 2. Reel type: TB2416 TB2416 or TB2416 TB2416 Orientation Mark side 3. Reel type: RD24D RD24D 4. Quantity of 1 reel: 500 pieces 4 ±0.1 21.05 17.1 ø2.2 10.7 12.5 16±0.1 24±0.3 ø1.5+0.1 -0 0.4 11.5±0.1 1.75±0.1 Tape Dimensions: Feeding 2±0.1 Reel Dimensions: 2±0.5 ø13±0.5 ø21±0.8 ø370 25.5+0.1 MAX. 2.0 Unit: mm 6 FTR-C1 Series Fujitsu Components International Headquarter Offices Japan Fujitsu Component Limited Gotanda-Chuo Building 3-5, Higashigotanda 2-chome, Shinagawa-ku Tokyo 141, Japan Tel: (81-3) 5449-7010 Fax: (81-3) 5449-2626 Email: promothq@ft.ed.fujitsu.com Web: www.fcl.fujitsu.com Europe Fujitsu Components Europe B.V. Diamantlaan 25 2132 WV Hoofddorp Netherlands Tel: (31-23) 5560910 Fax: (31-23) 5560950 Email: info@fceu.fujitsu.com Web: www.fceu.fujitsu.com North and South America Fujitsu Components America, Inc. 250 E. Caribbean Drive Sunnyvale, CA 94089 U.S.A. Tel: (1-408) 745-4900 Fax: (1-408) 745-4970 Email: marcom@fcai.fujitsu.com Web: www.fcai.fujitsu.com Asia Pacific Fujitsu Components Asia Ltd. 102E Pasir Panjang Road #04-01 Citilink Warehouse Complex Singapore 118529 Tel: (65) 6375-8560 Fax: (65) 6273-3021 Email: fcal@fcal.fujitsu.com www.fcal.fujitsu.com © 2003 Fujitsu Components America, Inc. All company and product names are trademarks or registered trademarks of their respective owners. Rev. 11/25/2003 7