FG-100 FG-100-1 FG100 FG-100-2

R C s US Operational Description Normally Open Model (high level) The control switch turns on (closes) when the float tips

FG-100 FG-100 Series Cable Suspended Mercury Tilt Switch R C s US Operational Description Normally Open Model (high level) The control switch turns on (closes) when the float tips slightly above horizontal, signaling a high level. It turns off (opens) when the float drops slightly below horizontal. FG-100 FG-100 Series Cable Suspended Mercury Tilt Switch s Usable in a wide range of liquids s Adjustable switch operating level s Maximum submersible depth to 30 ft. (9 m) s Reliable/long switch life s Easy installation s Cost effective These FG series cable suspended floats are designed for high or low level indication, particularly in many corrosive environments requiring long, dependable life. The FG series of floats are suitable for pump control because they contain a high performance mercury switch. Standard cable lengths are 20 ft. (6 m), and are available up to 30 ft. (9 m). The switch operating levels are easily adjustable by altering the height of the cable fixing point. Normally Closed Model (low level) The control switch turns on (closes) when the float drops slightly below horizontal, signaling a low level. It turns off (opens) when the float tips slightly above horizontal. For the Latest Information Try Our Fax Back System at 1/916/431-6544 On the Internet: www.stiautomationproducts.com E-mail: sales@stiautomationproducts.com Scientific Technologies Inc. Automation Products Group . Providing tailored solutions for measurement applications. R FG-100-1 FG-100-1 Tel: 1/888/525-7300 · Fax: 1/435/753-7490 www.stiautomationproducts.com · E-mail: sales@stiautomationproducts.com point level detection liquids This narrow angle sensing device is used to accurately monitor liquid levels in sewage and nonpotable water applications. The FG100 FG100 series control switch is not sensitive to rotation and is suitable for use with intrinsically safe circuits. Contact STI regarding specific intrinsically safe applications. FG-100 FG-100 Series Cable Suspended Mercury Tilt Switch s Specifications point level detection liquids Cable: flexible 18 gauge, 2 conductor (UL, CSA) SJOW, water resistant (CPE) jacket Float: 3.38 in. diameter x 4.55 in. long (8.58 cm x 11.56 cm), high impact, corrosion resistant, PVC housing for use in sewage and nonpotable water up to 140°F (60°C) Maximum Water Depth: 30 ft. (9 m), 13 psi Mercury Tilt Switch: single pole, single throw, mercury to mercury contacts, hermetically sealed in a steel capsule and epoxy sealed in the float housing Electrical: 5 A, 120/230 VAC, 50/60 Hz s s Ordering Information FG-100 FG-100 Configuration A (NO) Normally Open B (NC) Normally Closed Cable Length (null) 20 ft. (6 m) cable (standard) L_ m Intrinsic Safety Any of the STI float switch level controls may be used with STI Intrinsic Safety Barriers (IS) to meet hazardous location requirements for level control device. For more information see www.automationsensors.com/ 7150. For for hazardous location requirements see the website at www.automationsensors.com/ 0825. E Scientific Technologies Inc. Automation Products Group . Providing tailored solutions for measurement applications. R FG-100-2 FG-100-2 To Assist Your Selection Process See the level and flow control engineering form located at www.automationsensors.com/6259 (or fax back #6259). Tel: 1/888/525-7300 · Fax: 1/435/753-7490 www.stiautomationproducts.com · E-mail: sales@stiautomationproducts.com