FCA-212 FCA-412 115VAC 60AMPS 50/60HZ FCA-212-A - Datasheet Archive

 

FCA-212 Tyco Electronics Mid-Range Military/Aerospace Relays 12 AMPERES, DPDT q HERMETICALLY SEALED q ALL WELDED CONSTRUCTION q

 

SERIES FCA-212 FCA-212 Tyco Electronics Mid-Range Military/Aerospace Relays 12 AMPERES, DPDT q HERMETICALLY SEALED q ALL WELDED CONSTRUCTION q BALANCED FORCE q PERMANENT MAGNET DRIVE q CONTACTS: SILVER CADMIUM OXIDE WITH GOLD PLATING q COILS FOR DC, 50 TO 400Hz AND 400Hz AC q WEIGHT 1.6 OUNCES MAX. (45.4 GRAMS) The Series FCA-212 FCA-212 relay is a polarized single-side stable design, where the flux from a permanent magnet provides the armature holding force in the deactivated state, and its flux path is switched and combined with the coil flux in the operated state. This results in appreciably increased contact pressure in both states over that of a spring return nonpolar design. We also manufacture other versions of this relay: FCA-412 FCA-412: 12 AMP 4PDT RELAY CONTACT RATING-AMPERES Ratings Are Continuous Duty TYPE OF LOAD LIFE (MIN.) CYCLES X 103 Resistive Inductive Motor Lamp 100 20 100 100 28 VDC 12 8 4 2 115VAC 115VAC 400Hz 12 8 4 2 115/200 VAC 30 400Hz 60Hz * 12 8 4 2 * 60 Hz LOADS RATED FOR 10,000 OPERATIONS OVERLOAD CURRENT 40 AMPS DC, 60AMPS 60AMPS 400Hz RUPTURE CURRENT 50 AMPS DC, 80 AMPS 400Hz CONTACT MAKE BOUNCE 1 MILLISECOND AT NOMINAL VOLTAGE MAX. CONTACT DROP AT 12 AMPS: INITIAL 0.150 VOLTS. END OF LIFE 0.175 VOLTS 12 2.5 2.5 2.0 1 SERIES FCA-212 FCA-212 Tyco Electronics Mid-Range Military/Aerospace Relays 12 AMPERES, DPDT COIL DATA COIL CODE 1 2 3 4 (A) 5 6 7 8 9 NOMINAL VOLTAGES FREQ. Hz 6 12 28 28 48 28 28 115 115 DC DC DC DC DC 400Hz 50/400Hz 400 Hz 50/400Hz OVER TEMPERATURE RANGE DC RES. DROPOUT OR MUST HOLD PICKUP OR AC AMPS (B) BELOW VOLTS ABOVE VOLTS VOLTAGE (C) 20 80 320 320 920 180 mA 100 mA 40 mA 30 mA A. CODE 4 COILS HAVE BACK EMF SUPPRESSION D. TO 42 VOLTS MAX. B. DC COIL RESISTANCE ± 10% AT 25°C; E. AC COIL MAX. CURRENT AT NOMINAL VOLTAGE. C. RELAY WILL STAY IN PICKED-UP STATE DOWN TO MUST HOLD VOLTAGES SHOWN. 4.5 9.0 18.0 18.0 32.0 22.0 22.0 90.0 95.0 0.3 0.75 1.5 1.5 2.5 1.25 1.25 5.0 5.0 2.5 4.5 7.0 7.0 14.0 10.0 10.0 40.0 40.0 MAX. OVERVOLTAGE: 6 & 12 VDC COILS 120% OF NOMINAL; ALL OTHERS 110% OF NOMINAL. COILS AVAILABLE FOR OTHER VOLTAGES AND FOR AC 50/60HZ 50/60HZ. GENERAL SPECIFICATIONS TEMPERATURE RATING: ALTITUDE: SHOCK:* VIBRATION, SINUSOIDAL:* VIBRATION, RANDOM: * DIELECTRIC STRENGTH AT SEA LEVEL: Z, Y, & X ENCLOSURES W & M ENCLOSURES (STUD MTG.) Z, Y, & X ENCLOSURES W ENCLOSURE Z, Y, & X ENCLOSURES W & M ENCLOSURES (STUD MTG.) ALL CIRCUITS TO GROUND AND CIRCUIT TO CIRCUIT. COIL TO GROUND DIELECTRIC STRENGTH AT 80,000 FEET: INSULATION RESISTANCE: -70°C TO + 125°C 300,000 FEET 200 g FOR 6 mS 100 g FOR 6 mS 30 g 33-3000Hz 20 g 33-3000Hz 0.4 g2/Hz 50-2000Hz 0.2 g2/Hz 50-2000Hz 1250 V rms 1000 V rms 350 V rms 100 M MINIMUM INITIAL (500 VDC) AFTER LIFE OR ENVIRONMENTAL TESTS 50 M MINIMUM OPERATE TIME AT NOMINAL VOLTAGE: DC RELAYS 10 ms OR LESS 15 ms OR LESS AC RELAYS RELEASE TIME AT NOMINAL VOLTAGE: DC RELAYS 10 ms OR LESS 50 ms OR LESS AC RELAYS * Max. contact opening under vibration or shock 10 microseconds 13 SERIES FCA-212 FCA-212 Tyco Electronics Mid-Range Military/Aerospace Relays 12 AMPERES, DPDT Below are shown the standard terminal types and the enclosures available. Specify the assembly as indicated under How To Order. Dimensions are shown in inches ± .010 and (Millimeters ± .25). TERMINALS SOCKET PINS ARE GOLD PLATED POLARIZING PINS ARE TIN/LEAD PLATED. CIRCUIT BOARD PINS ARE TIN/LEAD PLATED. DIMENSIONS EXCEPT AS NOTED: INCHES ± .010 (MILLIMETERS ± .25) CODE "D" Socket Pins 115 VAC .050 ± .005 (1.27 ± (.13) Silicone Rubber Gasket .270 (6.86) CODE "A" Socket Pins - All DC Coils .330 ±.030 (8.83)± (.76) .270 (6.86) +.006 .115 - (.010) (2.92) +(.152) - (.254) .050 ± .005 (1.27 ± (.127) Silicone Rubber Gasket .070 (1.78) .050 (1.27) -X2 .062 (1.57) Dia. BLUE BEAD BLUE BEAD .270 (6.86) .027 ±.003 (.69) ± (.08) 1.025 Max. (26.04) .525 Max. (13.34) Socket Pins 28 VAC Coils Same as Code "D" Except polarizing Pin turned 90° to this plane. POLARIZING PIN .062 ±.001Dia. Pin (1.57 ± .02 ) 8 Plcs CODE "B" Circuit Board Pins - All DC Coils "A" AC Coils 1.125 in. (28.57) Max. DC Coils 1.010 in. (25.65) Max. CODE "Z" .062 ± .001Dia. Pin (1.57 ± .02) +X1 CODE "E" Dimensions: Inches ± .010 (mm ± .25) "A" MAX. -X2 .300 (7.62) .062 +.002 Dia. - .001 +.05 (1.57 - .02) Polar Pin ENCLOSURES All Enclosures have Cupro-Nickel Cans bright acid tin/lead plated after assembly to terminal headers. CODE "Y" "A" MAX. CODE "F" Circuit Board Pins 115 VAC Coils .156 (3.96) FULL R 4 PLCS .270 (6.86) .300 (7.62) -X2 .062 +.002 Dia. - .001 (1.57 +.05) Polar - .02 Pin BLUE BEAD +.006 .115 - (.010) (2.92) +(.152) - (.254) .070 (1.78) .050 (1.27) +X1 BLUE BEAD CODE Solder Hook Terminals "C" HOOK TERMINALS TIN/lead PLATED 1.718 Max. (43.64) CODE "X" .375 (9.52) .027 ±.003 (.69) ± (.08) .150 (3.8) .062 +002 Dia. Pin -.001 Circuit Board Pins 28 VAC Coils Same as Code "D" Except polarizing Pin turned 90° to this plane. .550 (13.97) AC COILS 1.025 Max. (26.04) 1.396 (35.46) 1.446 (36.73) FULL R 4 PLCS 1.718 Max. (43.64) .312 CODE (7.92) "W" 6-32 UNC-2A -X2 +X1 BLUE BEAD CODE "H" .040 (1.02) .375 (9.52) 2 Studs * 0.80 DIA (2.03) +.002 .062 - .001Dia. Term. (1.57 ) +.05 8 Plcs - .02 .500 (12.70) DC COILS .525 Max. (13.34) POLARIZING PIN .300 ± .020 (7.62)± .51 .150 (3.8) .375 (9.52) "A" MAX. -X2 .062 (1.57) Dia. CODE "F" .040 (1.02) .525 Max. (13.34) .330 ±.030 (8.83) ± (.76) .062 ±.001Dia. Pin (1.57 ± .02) 8 Plcs 1.025 Max. (26.04) 1.446 (36.73) 1.396 (35.46) 90° Solder Pins All Pins Bright Acid Tin/lead .400 (10.61) .200 (5.08) .200 (5.08) BLUE BEAD +.002 .062 - .001 Dia. 14 .031 (.787) "A" MAX. 1.025 Max. (26.04) .100 R TYP. .200 .200 (5.08) (5.08) .257 (6.52) .525 Max. (13.34) .625 (5.88) *Metric threads available,To specify use M in place of W SERIES FCA-212 FCA-212 Tyco Electronics Mid-Range Military/Aerospace Relays 12 AMPERES, DPDT TERMINAL WIRING DC COILS DC COILS WITH TRANSIENT SUPPRESSION 1 - X2 2 + X1 3 1 B A + BLUE BEAD - X2 2 + X1 POLARIZING PIN POLARIZING PIN POLARIZING PIN POLARIZING PIN AC COILS 28 VAC AC COILS 115 VAC + 3 1 B 2 X2 1 3 X2 B AC X1 A AC X1 A BLUE BEAD BLUE BEAD BLUE BEAD NOTE: Polarity must be observed with DC coil supply. Relay is polarized with a permanent magnet and will not operate or be damaged by reverse polarity. TERMINAL LAYOUT Diodes used in transient suppression and in AC rectifier circuits have peak inverse voltage rating of 600 VDC minimum. Zener diodes have a minimum rating of 1 watt. .200 (5.08) .100 (2.54) A1 -X2 A2 A3 B A Terminal designations are for reference only and do not appear on the header. .100 (2.54) +X1 .200 (5.08) .400 (10.16) .600 (15.24) HOW TO ORDER FCA-212-A FCA-212-A Y 4 (EXAMPLE) RELAY TYPE TERMINALS (Socket Pins, DC Coil) ENCLOSURE (With Flanges) COIL (28 VDC With Transient Suppression). 15 2 3 B A