DWDM-X2-50 92-AS X-100 - Datasheet Archive

DATA SHEET DWDM X2 Transceiver, 32 wavelengths, SC Connectors, 80km over Single Mode Fiber DWDM-X2-50.92-AS Overview Agilestar's

DWDM-X2-50 DWDM-X2-50.92-AS 92-AS DATA SHEET DWDM X2 Transceiver, 32 wavelengths, SC Connectors, 80km over Single Mode Fiber DWDM-X2-50 DWDM-X2-50.92-AS 92-AS Overview Agilestar's DWDM-X2-50 DWDM-X2-50.92-AS 92-AS DWDM 10GBd X2 optical transceivers are designed for Storage, IP network and LAN, it is a hot pluggable module in the Z-direction that is mainly usable in typical router/switches line card applications. The DWDM-X2-50 DWDM-X2-50.92-AS 92-AS is a fully integrated 10.3 Gb/s optical transceiver module that consists of ITU 100GHz grid wavelength optical transmitter and receiver, XAUI interface, Mux and Demux with clock and data recovery (CDR). In addition, they comply with the X2 Multi Sourcing Agreement (MSA). Product Features Up to 10 GBd bi-directional data links. Compliant with IEEE 802.3ae application. Compliant with X2 MSA. Temperature stabilized EML transmitter. 100GHz ITU Grid, C Band APD Photo-detector. XAUI electrical interface: 4 lanes @ 3.125 GBd. MDIO, DOM (Digital Optics Monitoring) support. Hot Z-Pluggable. SC Connectors Up to 80km on SMF Power Supply: 5V/3.3V/Adaptable Power Supply (APS: 1.2V) RoHS Compliance Class 1 laser product complies with EN 60825-1 Operating temperature range: 0 to 70. Applications DWDM 10 GBd Ethernet Ordering Information Part Number Description DWDM-X2-50 DWDM-X2-50.92-AS 92-AS DWDM X2 Transceiver, SC Connectors, SingleMode Fiber 80km(ITU 100GHz Grid) For More Information: Agilestar, Inc. 2033 Gateway Place Phone: 1 408 855 8418 San Jose, California 95110 Fax: 1 408 486 5653 United States Email: Sales@Agilestar.com Page 1 / 9 www.Agilestar.com Phone: 408-855-8418 Fax: 408 486 5653 E-Mail: Sales@Agilestar.com DWDM-X2-50 DWDM-X2-50.92-AS 92-AS Absolute Maximum Ratings Parameter Symbol Min Storage Ambient Temperature TS Supply Voltage (5V) Typ Max Unit 40 85 V5 0 6 V Supply Voltage (3.3V) V3 0 4 V Supply Voltage (APS) VAPS 0 1.5 V Optical Receiver Input PIMAX -5 dBm Max Remarks Unit Average General Specifications Parameter Symbol Min Typ DR Data Rate 10.3125 10 P Total Power Consumption GBd -12 BER Bit Error Rate Remarks 4 W Supply Voltage (5V) VCC5 4.75 5 5.25 V Operating Environment Supply Voltage (+3.3V) VCC3 3.14 3.3 3.47 V Operating Environment Supply Voltage (APS) VCCAPS 1.152 1.2 1.248 V Operating Environment Supply Current (5V) ICC5 350 mA Supply Current (+3.3V) ICC3 300 mA ICCAPS 1000 mA 70 Supply Current (APS) TC Case Operating Temperature 0 Link Distances Parameter Fiber Type 9/125um SMF 10.3125 GBd Distance Range (Km) 80 Optical Characteristics - Transmitter VCC5=4.75V to 5.25V, VCC3=3.14V to 3.47V, VCCAPS=1.152V to 1.248V, TC=0 to 70 Parameter Symbol Min Typ Max Unit X-100 X-100 X X+100 pm Note 1 POUT 1 4 dBm Average 30 dBm Average Optical Wavelength Launch Power Launch Power of OFF POUT_OFF Transmitter Side Mode Suppression Ratio SMSR Spectral Width ( 20 dB) ER dB Optical Extinction Ratio 30 Remarks 0.2 9 nm dB Optical Return Loss Tolerance ORLT 12 dB Relative Intensity Noise RIN 128 dB/Hz Transmitter Dispersion Penalty TDP 2 dB Eye Mask Definition According to IEEE 802.3ae Note 1X = specified ITU Grid wavelength Page 2 / 9 www.Agilestar.com Phone: 408-855-8418 Fax: 408 486 5653 E-Mail: Sales@Agilestar.com DWDM-X2-50 DWDM-X2-50.92-AS 92-AS Optical Characteristics - Receiver VCC5=4.75V to 5.25V, VCC3=3.14V to 3.47V, VCCAPS=1.152V to 1.248V, TC=0 to 70 Parameter Symbol Min Center Wavelength Range C Optical Input Power PIN Receive Reflectance TRRX Loss of Signal Assert Level PLOS_A Loss of Signal DeAssert Level PLOS_D Loss of Signal Hysteresis PLOS_H Receiver electrical 3dB upper cutoff frequency Typ Max Unit 1260 1600 nm 24 7 dBm 27 dB 30 Remarks Average, Informative dBm 24 1 dBm dBm FR 12.3 GHz Electrical Characteristics - DC VCC5=4.75V to 5.25V, VCC3=3.14V to 3.47V, VCCAPS=1.152V to 1.248V, TC=0 to 70 Parameter Symbol Min Typ Max Unit Remarks A. 1.2V COMS I/O DC Characteristics (PRTAD; LASI; RESET; TX_ON/OFF) External Pull-Up Resistor For RPU 10 Output High Voltage VOH 1 Output Low Voltage VOL Input High Voltage VIH Input Low Voltage VIL Input Pull-Down Current IPD Open Drain 22 k V 0.15 1.2 V 120 20 V 0.36 0.84 V uA VIN=1.2V B. XAUI I/O DC Charateristics (TXLANE[0.3]; RXLANE[0.3]) Differential Input Amplitude (pk pk ) Differential Output Amplitude (pk pk ) VIN_XAUI 200 2500 mV AC Coupled VOUT_XAUI 800 1600 mV AC Coupled IOL=100uA C. MDIO I/O DC Charateristics (MDIO; MDC) Output Low Voltage VOL 0.2 V Output Low Current IOL 4 mA Input High Voltage VIH 1.2 V Input Low Voltage VIL 0.36 V Pull-Up Supply Voltage VPU 1.248 V Input Capacitance CIN 10 pF Load Capacitance CLOAD 470 pF External Pull-Up Resistance RPU 0.84 1.152 1.2 200 Page 3 / 9 www.Agilestar.com Phone: 408-855-8418 Fax: 408 486 5653 E-Mail: Sales@Agilestar.com DWDM-X2-50 DWDM-X2-50.92-AS 92-AS Electrical Characteristics - AC VCC5=4.75V to 5.25V, VCC3=3.14V to 3.47V, VCCAPS=1.152V to 1.248V, TC=0 to 70 Parameter Symbol Min Typ Max Unit Remarks A. XAUI Input AC Characteristics (TXLANE[0.3]) Baud Rate BRXAUI_IN Baud Rate Tolerance BRTOL_XAUI 100 ZIN_XAUI 80 Differential Return Loss RLIN 10 Input Differential Skew TIN_SKEW Jitter Amplitude Tolerance JXAUI_TOL Differential Input Impedance 3.125 GBd 100 100 ppm 120 dB 100 MHz to 2.5 GHz 75 ps Crossing Point 0.65 UIPP IEEE 802.3ae B. XAUI Output AC Characteristics (RXLANE[0.3]) Baud Rate BRXAUI_OUT Baud Rate Variation BRXAUI_VAR XAUI Eye Mask (far-end) According to IEEE 802.3ae Output Differential Skew TOUT_SKEW Output Differential Impedance ZOUT_XAUI 80 Differential Output Return Loss RLOUT 10 Total Jitter TJXAUI Deterministic Jitter DJXAUI 3.125 100 GBd 100 15 100 ppm ps 120 dB 100 MHz to 2.5 GHz 0.35 UI Near-end No pre-equalization 0.17 UI 1 UI=320 ps C. Power-On Reset Characteristics Power-On Reset and TX_ONOFF Characteristics According to X2 MSA Issue D. MDIO I/O AC Characteristics (MDIO; MDC) MDIO Data Hold Time THOLD 10 ns MDIO Data Setup Time TSU 10 ns Delay from MDC Rising Edge to MDIO Data Change MDC Clock Rate TDELAY 300 ns fMAX 2.5 MHz Max Unit Digital Diagnostic Parameter Symbol Min Typ Temperature Monitor TMON -5 +5 °C Laser Bias Monitor IMON -10 10 % TX Power Monitor PTX -3 +3 dBm RX Power Monitor PRX -3 +3 Remarks dBm Page 4 / 9 www.Agilestar.com Phone: 408-855-8418 Fax: 408 486 5653 E-Mail: Sales@Agilestar.com DWDM-X2-50 DWDM-X2-50.92-AS 92-AS Dimensions ALL DIMENSIONS ARE ±0.2mm UNLESS OTHERWISE SPECIFIED Page 5 / 9 www.Agilestar.com Phone: 408-855-8418 Fax: 408 486 5653 E-Mail: Sales@Agilestar.com DWDM-X2-50 DWDM-X2-50.92-AS 92-AS Pin Assignment Pin 1 to Pin 35 PIN # Symbol I/O Logic Description PIN # 1 GND I Supply Electrical ground 1 2 GND I Supply Electrical ground 2 3 GND I Supply Electrical ground 3 4 5.0V I Supply Power 4 5 3.3V I Supply Power 5 6 3.3V I Supply Power 6 7 APS I Supply Adaptive Power Supply 7 8 APS I Supply Adaptive Power Supply 8 9 LASI O Open Drain 10 RESET I 1.2V CMOS 11 VEND SPECIFIC 12 TX ON/OFF 13 RESERVED 14 MOD DETECT 15 Link Alarm Status Interrupt. 10-22k ohm pull up on host 9 TX OFF when MDIO RESET 10 Vendor Specific Pin. Leave unconnected 11 Transmitter ON/OFF 12 Reserved 13 Pulled low inside module through 1k ohm 14 VEND SPECIFIC Vendor Specific Pin. Leave unconnected 15 16 VEND SPECIFIC Vendor Specific Pin. Leave unconnected 16 17 MDIO I/O Open Drain Management Data IO 17 18 MDC I 1.2V CMOS Management Data Clock 18 19 PRTAD4 I 1.2V CMOS Port Address bit 4 (Low=0) 19 20 PRTAD3 I 1.2V CMOS Port Address bit 3 (Low=0) 20 21 PRTAD2 I 1.2V CMOS Port Address bit 2 (Low=0) 21 22 PRTAD1 I 1.2V CMOS Port Address bit 1 (Low=0) 22 23 PRTAD0 I 1.2V CMOS Port Address bit 0 (Low=0) 23 24 VEND SPECIFIC Vendor Specific Pin. Leave unconnected 24 25 APS SET Feedback output for APS 25 26 RESERVED Reserved for Avalanche Photodiode use 26 27 APS SENSE O Analog APS Sense Connection 27 28 APS I Supply Adaptive Power Supply 28 29 APS I Supply Adaptive Power Supply 29 30 3.3V I Supply Power 30 31 3.3V I Supply Power 31 32 5.0V Supply Power 32 33 GND I Supply Electrical Ground 33 34 GND I Supply Electrical Ground 34 35 GND I Supply Electrical Ground 35 I 1.2V CMOS O O Page 6 / 9 www.Agilestar.com Phone: 408-855-8418 Fax: 408 486 5653 E-Mail: Sales@Agilestar.com DWDM-X2-50 DWDM-X2-50.92-AS 92-AS Pin Assignment Pin 36 to Pin 70 PIN # Symbol I/O Logic Description 36 GND I Supply Electrical ground 37 GND I Supply Electrical ground 38 RESERVED Reserved 39 RESERVED Reserved 40 GND I Supply 41 RX LANE 0+ O AC Module XAUI Output Lane 0+ 42 RX LANE 0 O AC Module XAUI Output Lane 0 43 GND I Supply 44 RX LANE 1+ O AC Module XAUI Output Lane 1+ 45 RX LANE 1 O AC Module XAUI Output Lane 1 46 GND I Supply 47 RX LANE 2+ O AC Module XAUI Output Lane 2+ 48 RX LANE 2 O AC Module XAUI Output Lane 2 49 GND I Supply 50 RX LANE 3+ O AC Module XAUI Output Lane 3+ 51 RX LANE 3 O AC Module XAUI Output Lane 3 52 GND I Supply Electrical ground 53 GND I Supply Electrical ground 54 GND I Supply Electrical ground 55 TX LANE 0+ O AC Module XAUI Input Lane 0+ 56 TX LANE 0 O AC Module XAUI Input Lane 0 57 GND I Supply 58 TX LANE 1+ O AC Module XAUI Input Lane 1+ 59 TX LANE 1 O AC Module XAUI Input Lane 1 60 GND I Supply 61 TX LANE 2+ O AC Module XAUI Input Lane 2+ 62 TX LANE 2 O AC Module XAUI Input Lane 2 63 GND I Supply 64 TX LANE 3+ O AC Module XAUI Input Lane 3+ 65 TX LANE 3 O AC Module XAUI Input Lane 3 66 GND I Supply 67 RESERVED Reserved 68 RESERVED Reserved 69 GND I Supply Electrical Ground 70 GND I Supply Remarks Electrical Ground Electrical ground Electrical ground Electrical ground Electrical ground Electrical ground Electrical ground Electrical ground Electrical ground Page 7 / 9 www.Agilestar.com Phone: 408-855-8418 Fax: 408 486 5653 E-Mail: Sales@Agilestar.com DWDM-X2-50 DWDM-X2-50.92-AS 92-AS Electrical Pad Layout Top of Transceiver PCB Bottom of Transceiver PCB As viewed through top Page 8 / 9 www.Agilestar.com Phone: 408-855-8418 Fax: 408 486 5653 E-Mail: Sales@Agilestar.com DWDM-X2-50 DWDM-X2-50.92-AS 92-AS References 1. IEEE standard 802.3. IEEE Standard Department, 2005. 2. X2 Multi-Source Agreement (MSA). Page 9 / 9 www.Agilestar.com Phone: 408-855-8418 Fax: 408 486 5653 E-Mail: Sales@Agilestar.com