BC182LB 182LB - Datasheet Archive
TECHNOLOGIES BC182LB SILICON NPN SMALL SIGNAL TRANSISTOR 1 BVCEO . . . . 50 V (Min) hFE . . . . 80 (Min) @ VCE = 5.0 V, IC = 100
DISCRETE POWER & SIGNAL TECHNOLOGIES BC182LB BC182LB SILICON NPN SMALL SIGNAL TRANSISTOR 1 BVCEO . . . . 50 V (Min) hFE . . . . 80 (Min) @ VCE = 5.0 V, IC = 100 mA 1 2 C 3 0.135 - 0.145 (3.429 - 3.683) 3 B 2 E 0.175 - 0.185 (4.450 - 4.700) ABSOLUTE MAXIMUM RATINGS (NOTE 1) TEMPERATURES Storage Temperature -55 Degrees C to 150 Degrees C Operating Junction Temperature 150 Degrees C LOGOXYY 0.175 - 0.185 (4.450 - 4.700) BC 182LB 182LB SEATING POWER DISSIPATION (NOTES 2 & 3) Total Device Dissipation at TA = 25 Deg C VOLTAGES & CURRENT VCEO Collector to Emitter VCBO Collector to Base VEBO Emitter to Base IC Collector Current PLANE 625 mW 0.500 MIN (12.70) 50 V 60 V 5V 500 mA 0.016 - 0.021 (0.410- 0.533) 0.045 - 0.055 (1.143- 1.397) 0.095 - 0.105 (2.413 - 2.667) ELECTRICAL CHARACTERISTICS (25 Degrees C Ambient Temperature unless otherwise stated) SYM CHARACTERISTICS MIN MAX UNITS TEST CONDITIONS BVCBO Collector to Base Voltage 60 V IC = 10 uA BVCEO Collector to Emitter Voltage 50 V IC = 2.0 mA BVEBO Emitter to Base Voltage 5 V IE = 10 uA ICBO Collector Cutoff Current 15 nA VCB = 50 V IEBO Emitter Cutoff Current 15 nA VEB = 4.0 V hFE DC Current Gain VCE(sat) Collector-Emitter Saturation Voltage 0.25 0.6 VBE(sat) Base-Emitter Saturation Voltage VBE(on) Base -Emitter On Voltage 1999 Fairchild Semiconductor Corporation 40 80 IC = IC = 10 uA 100 mA V V IC IC = 10mA = 100mA IB = IB = 0.5mA 5.0mA 1.2 0.55 VCE = 5.0 V VCE = 5.0 V V IC = 100mA IB = 5.0mA 0.7 V VCE = IC = 2mA Page 1 of 2 5.0 V Pr10/1094 DISCRETE POWER & SIGNAL TECHNOLOGIES BC182LB BC182LB SILICON NPN SMALL SIGNAL TRANSISTOR ELECTRICAL CHARACTERISTICS Con't (25 Degrees C Ambient Temperature unless otherwise stated) SYM CHARACTERISTICS MIN COB Output Capacitance fT Current Gain - Bandwidth Product 150 hfe Small Signal Current Gain 240 NF Noise Figure MAX 5.0 UNITS TEST CONDITIONS 10 VCB = MHz 500 pF 10 V, f = 1 MHz VCE = 5 V f = 100 Mhz - VCE = 5 V, IC=2.0 mA, f =1KHz dB VCE = 5 V, IC = 200 uA, Rg = 2 Kohms, f = 1 KHz IC = 10 mA NOTES: 1. These ratings are limiting values above which the serviceability of any semiconductor device may be impaired. 2. These are steady state limits. The factory should be consulted on applications involving pulsed or low duty cycle operations. 3. These ratings are based on a maximum junction temperature of 150 degrees C. 1999 Fairchild Semiconductor Corporation Page 2 of 2 Pr10/1094 TRADEMARKS The following are registered and unregistered trademarks Fairchild Semiconductor owns or is authorized to use and is not intended to be an exhaustive list of all such trademarks. ACExTM CoolFETTM CROSSVOLTTM E2CMOSTM FACTTM FACT Quiet SeriesTM FAST® FASTrTM GTOTM HiSeCTM ISOPLANARTM MICROWIRETM POPTM PowerTrenchTM QSTM Quiet SeriesTM SuperSOTTM-3 SuperSOTTM-6 SuperSOTTM-8 TinyLogicTM UHCTM VCXTM DISCLAIMER FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY PRODUCTS HEREIN TO IMPROVE RELIABILITY, FUNCTION OR DESIGN. FAIRCHILD DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT OR CIRCUIT DESCRIBED HEREIN; NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS. LIFE SUPPORT POLICY FAIRCHILD'S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF FAIRCHILD SEMICONDUCTOR CORPORATION. As used herein: 1. Life support devices or systems are devices or 2. A critical component is any component of a life support device or system whose failure to perform can systems which, (a) are intended for surgical implant into be reasonably expected to cause the failure of the life the body, or (b) support or sustain life, or (c) whose support device or system, or to affect its safety or failure to perform when properly used in accordance with instructions for use provided in the labeling, can be effectiveness. reasonably expected to result in significant injury to the user. PRODUCT STATUS DEFINITIONS Definition of Terms Datasheet Identification Product Status Definition Advance Information Formative or In Design This datasheet contains the design specifications for product development. Specifications may change in any manner without notice. Preliminary First Production This datasheet contains preliminary data, and supplementary data will be published at a later date. Fairchild Semiconductor reserves the right to make changes at any time without notice in order to improve design. No Identification Needed Full Production This datasheet contains final specifications. Fairchild Semiconductor reserves the right to make changes at any time without notice in order to improve design. Obsolete Not In Production This datasheet contains specifications on a product that has been discontinued by Fairchild semiconductor. The datasheet is printed for reference information only.