AZ940 E44211 AZ940-1C-3D AZ940-1C-5D AZ940-1C-6D AZ940-1C-9D AZ940-1C-12D - Datasheet Archive

 

10 AMP MINIATURE POWER RELAY FEATURES · · · · · · 10 Amp switching capability SPST-N.O.

 

AZ940 AZ940 10 AMP MINIATURE POWER RELAY FEATURES · · · · · · 10 Amp switching capability SPST-N.O. and SPDT configurations 4 kV dielectric strength Epoxy sealed version available Class B insulated standard, Class F available UL, CUR file E44211 E44211, VDE file 134326 GENERAL DATA CONTACTS Arrangement Ratings SPST N.O. (1 Form A) SPDT (1 Form C) Resistive load: Max. switched power: 150 W or 1250 VA N.O. 90 W or 750 VA N.C. Max. switched current:10 A N.O., 3 A N.C. Max. switched voltage: 150 VDC* or 400 VAC *Note: If switching voltage is greater than 30 VDC, special precautions must be taken. Please contact the factory. UL, CUR 10 A at 125 VAC General Use, 100k cycles (N.O.) 10 A at 277 VAC COS =.4, 10k cycles 5 A at 250 VAC General Use, 100k cycles 5 A at 30 VDC 1/10 HP at 125 VAC, 100k cycles 1/6 HP at 250 VAC, 100k cycles UL, CUR 3 A at 250 VAC General Use, 100k cycles (N.C.) 3 A at 30 VDC Resistive, 100k cycles VDE Material Form A N.O.: 5 A 250 VAC Form C N.O.: 5 A 250 VAC Form C N.C.: 3 A 250 VAC Life Expectancy Mechanical Electrical Minimum operations 1 x 107 1 x 105 at 10 A 120 VAC Res. Operate Time (max.) 8 ms at nominal coil voltage Release Time (max.) 5 ms at nominal coil voltage (with no coil suppression) Dielectric Strength 1000 Vrms contact to contact (at sea level for 1 min.) 4000 Vrms contact to coil Insulation Resistance 1 x 109 ohms minimum at 500 VDC Dropout Greater than 5% of nominal coil voltage Ambient Temperature Operating At nominal coil voltage -40°C (-40°F) to 90°C (194°F) Class B -40°C (-40°F) to 110°C (230°F) Class F -40°C (-40°F) to 130°C (266°F) Class B -40°C (-40°F) to 155°C (311°F) Class F Storage Vibration 0.062" DA at 10­55 Hz Shock Operating Mechanical Silver cadmium oxide or silver nickel 10 g for 11 ms 1/2 sine pulse (no contact opening >100 usec) 100 g for 11 ms 1/2 sine pulse Tinned copper alloy, P.C. 270°C (518°F) 5 seconds 80°C (176°F) Max. Immersion Time Power Terminals Max. Solvent Temp. COIL P.B.T. polyester Max. Solder Time < 0.1 Ohm (24 V, 1 A voltage drop method) Enclosure Max. Solder Temp. Resistance 30 seconds 7 grams At Pickup Voltage (typical) 253 mW (Standard Coil) 113 mW (Sensitive Coil) Weight Max. Continuous Dissipation 1.25 W at 20°C (68°F) NOTES Temperature Rise 40°C (72°F) (Standard Coil) 20°C (36°F) (Sensitive Coil) 1. All values at 20°C (68°F). Max. 130°C (266°F) Class B Max. 155°C (311°F) Class F 3. Specifications subject to change without notice. Temperature 2. Relay may pull in with less than "Must Operate" value. 8/6/10 AZ940 AZ940 RELAY ORDERING DATA ORDER NUMBER* COIL SPECIFICATIONS ­ Standard Coil (SPDT and SPST) Nominal Coil VDC 3 Must Operate VDC 2.3 Max. Continuous VDC 5.0 Coil Resistance ± 10% 20 SPDT SPST-NO AZ940 AZ940­1A­3D AZ940-1C-3D AZ940-1C-3D 5 3.8 8.3 55 AZ940 AZ940­1A­5D AZ940-1C-5D AZ940-1C-5D 6 4.5 10.0 80 AZ940 AZ940­1A­6D AZ940-1C-6D AZ940-1C-6D AZ940-1C-9D AZ940-1C-9D 9 6.8 15.0 180 AZ940 AZ940­1A­9D 12 9.0 20.0 320 AZ940 AZ940­1A­12D AZ940-1C-12D AZ940-1C-12D 18 13.5 30.0 720 AZ940 AZ940­1A­18D AZ940-1C-18D AZ940-1C-18D 24 18.0 40.0 1280 AZ940 AZ940­1A­24D AZ940-1C-24D AZ940-1C-24D *For silver nickel contacts substitute "-1AB" for "-1A" or "-1CB" for "-1C". Add suffix "E" for sealed version. Add suffix "G" for gold plating. Add suffix "F" for Class F. Class F not VDE approved. ORDER NUMBER* COIL SPECIFICATIONS ­ Sensitive Coil (SPST) Nominal Coil VDC 3 Must Operate VDC 2.3 Max. Continuous VDC 7.5 5 3.8 12.5 6 4.5 15.0 9 6.8 12 Coil Resistance ± 10% 45 Unsealed Sealed AZ940 AZ940­1A­3DS AZ940-1A-3DSE AZ940-1A-3DSE 125 AZ940 AZ940­1A­5DS AZ940-1A-5DSE AZ940-1A-5DSE 180 AZ940 AZ940­1A­6DS AZ940-1A-6DSE AZ940-1A-6DSE 22.4 400 AZ940 AZ940­1A­9DS AZ940-1A-9DSE AZ940-1A-9DSE 9.0 30.0 720 AZ940 AZ940­1A­12DS AZ940-1A-12DSE AZ940-1A-12DSE 18 13.5 44.7 1600 AZ940 AZ940­1A­18DS AZ940-1A-18DSE AZ940-1A-18DSE 24 18.0 59.2 2800 AZ940 AZ940­1A­24DS AZ940-1A-24DSE AZ940-1A-24DSE *For silver nickel contacts substitute "-1AB" for "-1A". Add suffix "G" for gold plating. Add suffix "F" for Class F. Class F not VDE approved. MECHANICAL DATA PC BOARD LAYOUT .807 max. [20.50] .417 max. [10.59] .054 [1.36] .400 [10.16] .300 [7.62] .058 [1.49] .300 [7.62] * .614 max. [15.60] .016 [0.40] 5 x ø.051 [ø1.3] .100 [2.54] *omitted from Form A 5 x.150 [3.8] WIRING DIAGRAM 2 x.018±.005 [0.45±0.12] FORM A 2 x.018±.005 [0.45±0.12] 3 x.031 [0.8] 3 x.012±.005 [0.31±0.12] FORM C VIEWED TOWARD TERMINALS Dimensions in inches with metric equivalents in parentheses. Tolerance: ± .010" 8/6/10