128MB JESD22 -128MM1U -256MM1U -512MM1U -IOCS16 D15-D00 D00-D07 D00-D15 256MB

IDE Flash Disk Module www.stec-inc.com SLFDM(40/44)(V/H)-xxx(M/G)M1U(I) Solid-State IDE Flash Disk Module (No Moving Parts)

128MB 128MB to 8GB IDE Flash Disk Module www.stec-inc.com SLFDM(40/44)(V/H)-xxx(M/G)M1U(I) Solid-State IDE Flash Disk Module (No Moving Parts) Capacity: 128MB 128MB - 8GB ATA-5 Compatible ATA Transfer modes: PIO 0-6, MWDMA 0-4 Supports TrueIDE and PC Card Memory and I/O Modes Form Factors: 40-Pin Vertical Plug-in 40-Pin Horizontal Plug in 40-Pin Vertical Plug-in, Housing 44-Pin Vertical Plug-in 44-Pin Horizontal Plug-in General Description and Key Features STEC's flash storage adheres to the latest industry compliance and regulatory standards including UL, FCC, RoHS, and various compliance associations. Each device incorporates a proprietary state-of-the-art flash memory controller that provides the greatest flexibility to customer-specific applications while supporting key flash management features resulting in the industry's highest reliability and endurance. Key features include: Built-in ECC engine detects up to 5-byte and corrects up to 4-byte errors Sophisticated block management and wear leveling algorithms guarantees 2,000,000 write/erase cycles Power-down data protection ensures data integrity and errors in case of power loss Lifecycle management feature allows users to monitor the device's block management STEC's IDE Flash Disk Module is the product of choice in applications requiring high reliability and high tolerance to shock, vibration, humidity, altitude, ESD, and temperature. The rugged industrial design combined with industrial temperature (-40°C to 85°C) testing and adherence to rigid JEDEC JESD22 JESD22 standards ensures flawless execution in the harshest environments. In addition to custom hardware and firmware designs, STEC also offers value-added services including: Custom labeling and packaging Custom software imaging and ID strings Full BOM control and product change notification Total supply-chain management to ensure continuity of supply In-field application engineering to help customers through product design-ins 44-Pin Vertical Plug-in, Housing Ordering Information: IDE Flash Disk Module Endurance Guarantee of 2,000,000 Write/Erase Cycles Master or Slave Select by Jumper 5V or 3.3V Power Supply Part Number Capacity SLFDM(40/44)(V/H)-128MM1U -128MM1U(I) 128 Mbytes SLFDM(40/44)(V/H)-256MM1U -256MM1U(I) 256 Mbytes SLFDM(40/44)(V/H)-512MM1U -512MM1U(I) 512 Mbytes SLFDM(40/44)(V/H)-1GM1U(I) 1 GByte SLFDM(40/44)(V/H)-2GM1U(I) 2 GBytes SLFDM(40/44)(V/H)-4GM1U(I) 4 GBytes SLFDM(40/44)H-8GM1U(I) 8 GBytes Commercial and Industrial Operating Temperature Range Legend: 5-Byte Detection, 4-Byte Correction ECC Engine (40/44) = 40-pin IDE connector and 4-pin power connector (40) or a 44-pin IDE connector with power supply through the 44-pin IDE connector (44). 10 Year Data Retention (M/G) = proceeding capacity (xxx) is in Megabytes (M) or Gigabytes (G). SLFDM = STEC standard IDE Flash Disk Module part number prefix. (V/H) = vertical (V) or horizontal (H) plug-in. M1 = STEC Mach 1 controller. RoHS-6 Compliant U = RoHS-6 compliant lead-free. Part numbers without (I) = Commercial temperature range (0ºC to 70ºC). (I) = Industrial temperature range (-40ºC to +85 ºC). Part numbers with S before dash = optional housing (e.g. SLFDM(40/44)VS-xxx(M/G)M1U(I). SLFDM(40/44)(V/H)-xxx(M/G)M1U(I) Datasheet IDE Flash Disk Module Table of Contents General Description and Key Features. 1 Ordering Information: IDE Flash Disk Module . 1 1.0 Product Specifications . 3 1.1 Package Dimensions, Pin Locations, and Master/Slave Jumpers . 3 1.1.1 40-Pin Vertical Plug-in . 3 1.1.2 40-Pin Horizontal Plug-in. 4 1.1.3 40-Pin Vertical Plug-in with Housing . 5 1.1.4 44-Pin Vertical Plug-in . 6 1.1.5 44-Pin Horizontal Plug-in. 7 1.1.6 44-Pin Vertical Plug-in with Housing . 8 1.2 Pin Assignment. 9 1.3 Signal Descriptions . 10 1.4 Performance . 11 1.5 CHS Parameters . 11 1.6 Standards Compliance . 12 1.6.1 CE and FCC Class B & D . 12 1.6.2 RoHS . 12 2.0 Environmental Specifications .13 2.1 Recommended Operating Conditions . 13 2.2 Reliability . 13 2.3 Shock, Vibration, and Humidity . 13 3.0 Electrical Specifications .14 3.1 Absolute Maximum Ratings . 14 3.2 DC Characteristics. 14 3.3 AC Characteristics . 15 3.3.1 True IDE Mode Register Access . 15 3.3.2 True IDE Mode PIO Access . 16 3.3.3 True IDE Mode Multiword DMA . 18 4.0 Identify Drive Parameter Information .19 5.0 Registers .20 6.0 Supported ATA Commands .21 7.0 Revision History .23 61000-04498-112, April 2008 2 SLFDM(40/44)(V/H)-xxx(M/G)M1U(I) Datasheet IDE Flash Disk Module 1.0 Product Specifications 1.1 Package Dimensions, Pin Locations, and Master/Slave Jumpers 1.1.1 40-Pin Vertical Plug-in Table 1 and Figure 1 show the mechanical dimensions of the 40-pin vertical plug-in module. Table 1: Mechanical dimensions 40-pin vertical plug-in module Parameter Value Length 54.23 ± 0.127 mm (2.135 ±. 0.005 in) Width 32.00 ± 0.140 mm (1.260 ± 0.055 in) Height 12.65 mm (0.498 in) nominal Figure 1: Mechanical dimensions 40-pin vertical plug-in module 61000-04498-112, April 2008 3 SLFDM(40/44)(V/H)-xxx(M/G)M1U(I) Datasheet IDE Flash Disk Module 1.1.2 40-Pin Horizontal Plug-in Table 2 and Figure 2 show the mechanical dimensions of the 40-pin horizontal plug-in module. Table 2: Mechanical dimensions 40-pin horizontal plug-in module Parameter Value Length 54.23 ± 0.127 mm (2.135 ±. 0.005 in) Width 22.35 ± 0.127 mm (0.880 ± 0.005 in) Height 16.33 mm (0.643 in) nominal Figure 2: Mechanical dimensions 40-pin horizontal plug-in module 61000-04498-112, April 2008 4 SLFDM(40/44)(V/H)-xxx(M/G)M1U(I) Datasheet IDE Flash Disk Module 1.1.3 40-Pin Vertical Plug-in with Housing Table 3 and Figure 3 show the mechanical dimensions of the 40-pin vertical plug-in module with Housing. Table 3: Mechanical dimensions 40-pin vertical plug-in module with housing Parameter Value Length 58.80 mm (2.315 in) typ Width 27.69 mm (1.090 in) typ Height 6.40 mm (0.252 in) typ Figure 3: Mechanical dimensions 40-pin vertical plug-in module with housing 61000-04498-112, April 2008 5 SLFDM(40/44)(V/H)-xxx(M/G)M1U(I) Datasheet IDE Flash Disk Module 1.1.4 44-Pin Vertical Plug-in Table 4 and Figure 4 show the mechanical dimensions of the 44-pin vertical plug-in module. Table 4: Mechanical dimensions 44-pin vertical plug-in module Parameter Value Length 50.80 ± 0.127 mm (2.000 ±. 0.005 in) Width 40.13 ± 0.140 mm (1.580 ± 0.055 in) Height 11.10 mm (0.437 in) nominal Figure 4: Mechanical dimensions 44-pin vertical plug-in module 61000-04498-112, April 2008 6 SLFDM(40/44)(V/H)-xxx(M/G)M1U(I) Datasheet IDE Flash Disk Module 1.1.5 44-Pin Horizontal Plug-in Table 5 and Figure 5 show the mechanical dimensions of the 44-pin horizontal plug-in module. Table 5: Mechanical dimensions 44-pin horizontal plug-in module Parameter Value Length 50.80 ± 0.127 mm (2.000 ±. 0.005 in) Width 29.46 ± 0.127 mm (1.160 ± 0.005 in) Height 14.71 mm (0.579 in) nominal Figure 5: Mechanical dimensions 44-pin horizontal plug-in module 61000-04498-112, April 2008 7 SLFDM(40/44)(V/H)-xxx(M/G)M1U(I) Datasheet IDE Flash Disk Module 1.1.6 44-Pin Vertical Plug-in with Housing Table 6 and Figure 6 show the mechanical dimensions of the 44-pin vertical plug-in module with Housing. Table 6: Mechanical dimensions 44-pin vertical plug-in module with housing Parameter Value Length 52.30 mm (2.059 in) typ Width 28.20 mm (1.210 in) typ Height 7.15 mm (0.281 in) typ Figure 6: Mechanical dimensions 44-pin vertical plug-in module with housing 61000-04498-112, April 2008 8 SLFDM(40/44)(V/H)-xxx(M/G)M1U(I) Datasheet 1.2 IDE Flash Disk Module Pin Assignment Table 7: IDE Flash Disk Module Pin Assignment Pin Number Signal Name Pin Type Pin Number Signal Name Pin Type 1 -RESET I 23 -IOWR I 2 GND Ground 24 GND Ground 3 D07 I/O 25 -IORD I 4 D08 I/O 26 GND Ground 5 D06 I/O 27 -IORDY O 6 D09 I/O 28 -CSEL (not used on housed modules) I 7 D05 I/O 29 -DMACK I 8 D10 I/O 30 GND Ground 9 D04 I/O 31 INTRQ O 10 D11 I/O 32 -IOCS16 -IOCS16 O 11 D03 I/O 33 A1 I 12 D12 I/O 34 -PDIAG I/O 13 D02 I/O 35 A0 I 14 D13 I/O 36 A2 I 15 D01 I/O 37 -CS0 I 16 D14 I/O 38 -CS1 I 17 D00 I/O 39 -DASP I/O 18 D15 I/O 40 GND Ground 19 GND Ground 41 VCC (44-pin version only) Power 20 Key Key 42 VCC (44-pin version only) Power 21 DMARQ O 43 GND (44-pin version only) Ground 22 GND Ground 44 NC (44-pin version only) No Connect Legend: - = Low active 61000-04498-112, April 2008 9 SLFDM(40/44)(V/H)-xxx(M/G)M1U(I) Datasheet 1.3 IDE Flash Disk Module Signal Descriptions Signal Name Dir Pin -DASP I/O 39 This input/output is the Disk Active/Slave Present signal in the Master/ Slave handshake protocol. D15-D00 D15-D00 I/O 18, 16, 14, 12, 10, 8, 6, 4, 3, 5, 7, 9, 11, 13, 15, 17 All Task File operations occur in byte mode on the low order bus D00-D07 D00-D07 while all data transfers are 16 bit using D00-D15 D00-D15. -IOWR I 23 The I/O Write strobe pulse is used to clock I/O data on the module Data bus into the Module controller registers when the Module is configured to use the I/O interface. The clocking will occur on the negative to positive edge of the signal (trailing edge). -IORD I 25 This is an I/O Read strobe generated by the host. This signal gates I/O data onto the bus from the Module. INTRQ O 31 Signal is the active high Interrupt Request to the host. A2-A0 I 35, 33, 36 A[2:0] are used to select the one of eight registers in the Task File. -CS0, -CS1 I 37, 38 -CS0 is the chip select for the task file registers while CS1 is used to select the Alternate Status Register and the Device Control Register. -CSEL (not used on housed modules) I 28 This internally pulled up signal is used to configure the card as a Master or Slave. When the pin is grounded, the card is configured as a Master. When the pin is open, the card is configured as a Slave. -IOCS16 -IOCS16 O 32 Not used. -PDIAG I/O 34 This input/output is the Pass Diagnostic signal in the Master/Slave handshake protocol. DMARQ O 21 This signal is asserted by the device when it is ready to transfer data to/ from the host. Data direction is controlled by -IORD and -IOWR. This signal is used in a handshake manner with DMACK. -DMACK I 29 This input signal is used by host in response to DMARQ to initiate DMA transfers. -IORDY O 27 Not used, and pulled up to VCC through a 4.7K ohm resistor. This input pin is the active low hardware reset from the host. -RESET Description I 1 VCC (44-pin version only) - 41, 42 Power. GND (Pin 43 present on 44-pin version only) - 2, 19, 22, 24, 26, 30, 40, 43 Ground. Key - 20 This pin is keyed to ensure cable is connected with the proper orientation. NC (44-pin version only) - 44 No connect. 61000-04498-112, April 2008 10 SLFDM(40/44)(V/H)-xxx(M/G)M1U(I) Datasheet 1.4 IDE Flash Disk Module Performance Table 8: IDE Flash Disk Module Read/Write Performance Parameter Data transfer rate to/from host 16.7 MBytes/s (burst) Sustained read up to 10 MBytes/s Sustained write 1.5 Value up to 7 MBytes/s CHS Parameters Table 9: CHS Parameters per capacity Capacity Cylinder (C) Head (H) Sectors/Track (S) 128MB 128MB 980 8 32 256MB 256MB 980 16 32 512MB 512MB 993 16 63 1GB 1,986 16 63 2GB 3,970 16 63 4GB 7,964 16 63 8GB 16,062 16 63 61000-04498-112, April 2008 11 SLFDM(40/44)(V/H)-xxx(M/G)M1U(I) Datasheet 1.6 IDE Flash Disk Module Standards Compliance STEC products specified in this document are compliant with Technical Committee T13, AT Attachment-5 (ATA-5) standards and are certified for compliance with these other industry standards: UL 950 CE, and FCC Class B & D RoHS 1.6.1 CE and FCC Class B & D The STEC products specified in this document meet the following requirements and limits of the European Standards: Class B requirements of the following European Standard: EN 55022: 1998 Information technology equipment Radio disturbance characteristics Limits and methods of measurement Class D limits of the following European Standards: EN 61000-3-2 Electromagnetic compatibility (EMC) Part 3-2: Limits Limits for harmonic current emissions (equipment input current up to and including 16 A per phase) EN 61000-3-3: 1995 Part 3: Limits Section 3: Limitation of voltage fluctuations and flicker in low-voltage supply systems for equipment with rated current