ACSP-2572 MIL-E-5400 MIL-STD-202 MIL-E-16400 MIL-STD-202F M105C MIL-STD-883

BIASED COAXIAL SCHOTTKY DETECTOR Frequency Range (min) Sensitivity (min) Flatness vs. Frequency (max) Typical TSS Nominal Video

ACSP-2572 ACSP-2572 BIASED COAXIAL SCHOTTKY DETECTOR Frequency Range (min) Sensitivity (min) Flatness vs. Frequency (max) Typical TSS Nominal Video Capacitance 0.5 18 1800 1.5 -52 12 GHz mV/mW ±dB dBm pF NOTES: Maximum input power: +20dBm Sensitivity is measured into an open circuit load (>10k ohm). VSWR is measured at or below -20dBm input power level. Video capacitance is used for RF bypass. This value can be changed if required for video response time. Contact the factory for more information. Standard bias is 100uA. This part number is also available with a zero bias schottky diode. Due to higher impedance, the zero bias schottky will exhibit less sensitive TSS (typically a 3dB reduction) The temperature performance of the zero bias schottky is poor when operating at low input power levels. ENVIRONMENTAL SPECIFICATIONS: MIL-E-5400 MIL-E-5400, MIL-STD-202 MIL-STD-202, MIL-E-16400 MIL-E-16400 Operating Temp: -55°C to +125°C Storage Temp: -65°C to +150°C Humidity: MIL-STD-202F MIL-STD-202F, M103, Cond B Shock: MIL-STD-202F MIL-STD-202F, M213, Cond B Altitude: MIL-STD-202F MIL-STD-202F, M105, Cond B Vibration : MIL-STD-202F MIL-STD-202F, M204, Cond B Thermal Shock: MIL-STD-202F MIL-STD-202F, M107, Cond A Temperature Cycle: MIL-STD-202F MIL-STD-202F, M105C M105C, Cond D SCREENING: Internal Visual per MIL-STD-883 MIL-STD-883, Method 2017 Temperature Cycle: -65°C to +100°C, 10 cycles OPTIONAL HIGH-REL SCREENING (Ref MIL-PRF-38534 MIL-PRF-38534): Stabilization Bake per MIL-STD-883 MIL-STD-883, Method 1008 Temperature Cycle per MIL-STD-883 MIL-STD-883, Method 1010 Constant Acceleration per MIL-STD-883 MIL-STD-883, Method 2001 Burn-in per MIL-STD-883 MIL-STD-883, Method 1015 Leak Test per MIL-STD-883 MIL-STD-883, Method 1014 External Visual per MIL-STD-883 MIL-STD-883, Method 2009 STANDARD CASE STYLE C3 (Optional Case Styles C15, C32) PART NUMBER ORDERING INFORMATION: · · · · · Add desired polarity suffix: "N" for Negative, "P" for Positive (Ex: ACSP-2572N ACSP-2572N) Add "Z" for zero biased schottky option (Ex: ACSP-2572NZ ACSP-2572NZ) Add desired case style suffix: "C3" (Ex: ACSP-2572NZC3 ACSP-2572NZC3) Add "R" suffix: Reverse Connector Configuration (Ex: ACSP-2572NZC3R ACSP-2572NZC3R) (SMA Female Input/SMA Male Output) Add "-RC" suffix: RoHS-compliant (Ex: ACSP-2572NZC3R-RC ACSP-2572NZC3R-RC) 0109 611 Industrial Way West, Eatontown, NJ 07724 tel: 732-460-0212 fax: 732-460-0214 sales@advanced-control.com www.advanced-control.com ACSP-2572 ACSP-2572 TYPICAL DATA Input: -20dBm 611 Industrial Way West, Eatontown, NJ 07724 tel: 732-460-0212 fax: 732-460-0214 sales@advanced-control.com www.advanced-control.com