ACSM-2003 MIL-E-5400 MIL-STD-202 MIL-E-16400 MIL-STD-202F M105C MIL-STD-883

SCHOTTKY DIODE MODULE DETECTORS Frequency Range (min) Sensitivity (min) Flatness vs. Frequency (max) Typical TSS Nominal Video

ACSM-2003 ACSM-2003 SCHOTTKY DIODE MODULE DETECTORS Frequency Range (min) Sensitivity (min) Flatness vs. Frequency (max) Typical TSS Nominal Video Capacitance 48 2000 0.4 -53 20 GHz mV/mW ±dB dBm pF NOTES: Maximum input power: +20dBm Sensitivity is measured into an open circuit load (>10k ohm). Video capacitance is used for RF bypass. This value can be changed if required for video response time. Contact the factory for more information. Standard bias is 100uA. This part number is also available with a zero bias schottky diode. Due to higher impedance, the zero bias schottky will exhibit less sensitive TSS (typically a 3dB reduction) The temperature performance of the zero bias schottky is poor when operating at low input power levels. ENVIRONMENTAL SPECIFICATIONS: MIL-E-5400 MIL-E-5400, MIL-STD-202 MIL-STD-202, MIL-E-16400 MIL-E-16400 Operating Temp: -55°C to +125°C Storage Temp: -65°C to +150°C Humidity: MIL-STD-202F MIL-STD-202F, M103, Cond B Shock: MIL-STD-202F MIL-STD-202F, M213, Cond B Altitude: MIL-STD-202F MIL-STD-202F, M105, Cond B Vibration : MIL-STD-202F MIL-STD-202F, M204, Cond B Thermal Shock: MIL-STD-202F MIL-STD-202F, M107, Cond A Temperature Cycle: MIL-STD-202F MIL-STD-202F, M105C M105C, Cond D SCREENING: Internal Visual per MIL-STD-883 MIL-STD-883, Method 2017 Temperature Cycle: -65°C to +100°C, 10 cycles OPTIONAL HIGH-REL SCREENING (Ref MIL-PRF-38534 MIL-PRF-38534): Stabilization Bake per MIL-STD-883 MIL-STD-883, Method 1008 Temperature Cycle per MIL-STD-883 MIL-STD-883, Method 1010 Constant Acceleration per MIL-STD-883 MIL-STD-883, Method 2001 Burn-in per MIL-STD-883 MIL-STD-883, Method 1015 Leak Test per MIL-STD-883 MIL-STD-883, Method 1014 External Visual per MIL-STD-883 MIL-STD-883, Method 2009 STANDARD CASE STYLE M12 (Optional Case Styles M51) PART NUMBER ORDERING INFORMATION: · · · · Add desired polarity suffix: "N" for Negative, "P" for Positive (Ex: ACSM-2003N ACSM-2003N) Add "Z" for zero biased schottky option (Ex: ACSM-2003NZ ACSM-2003NZ) Add desired case style suffix: "M12" (Ex: ACSM-2003NZM12 ACSM-2003NZM12) Add "-RC" suffix: RoHS-compliant (Ex: ACSM-2003NZM12-RC ACSM-2003NZM12-RC) 0109 611 Industrial Way West, Eatontown, NJ 07724 tel: 732-460-0212 fax: 732-460-0214 sales@advanced-control.com www.advanced-control.com ACSM-2003 ACSM-2003 TYPICAL DATA Input: -20dBm 611 Industrial Way West, Eatontown, NJ 07724 tel: 732-460-0212 fax: 732-460-0214 sales@advanced-control.com www.advanced-control.com