AA4040QWS/D DSAL0882 SEP/01/2010

LED LAMP Part Number: AA4040QWS/D White ATTENTION OBSERVE PRECAUTIONS FOR HANDLING ELECTROSTATIC DISCHARGE SENSITIVE DEVICES

4.0x4.0mm RIGHT ANGLE SURFACE MOUNT LED LAMP Part Number: AA4040QWS/D AA4040QWS/D White ATTENTION OBSERVE PRECAUTIONS FOR HANDLING ELECTROSTATIC DISCHARGE SENSITIVE DEVICES Features Description Single color. The source color devices are made with InGaN Light Emit- Suitable for all SMT assembly and solder process. ting Diode. Available on tape and reel. Static electricity and surge damage the LEDS. Ideal for backlighting. It is recommended to use a wrist band or anti-electrostatic Package : 500pcs / reel. glove when handling the LEDs. Moisture sensitivity level : level 3. All devices, equipment and machinery must be electrically RoHS compliant. grounded. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.25(0.01") unless otherwise noted. 3. The specifications, characteristics and technical data described in the datasheet are subject to change without prior notice. 4. The device has a single mounting surface. The device must be mounted according to the specifications. SPEC NO: DSAL0882 DSAL0882 REV NO: V.1 APPROVED: WYNEC CHECKED: Allen Liu DATE: SEP/01/2010 SEP/01/2010 DRAWN: Y.H.Wu PAGE: 1 OF 7 ERP: 1201006293 Handling Precautions Compare to epoxy encapsulant that is hard and brittle, silicone is softer and flexible. Although its characteristic significantly reduces thermal stress, it is more susceptible to damage by external mechanical force. As a result, special handling precautions need to be observed during assembly using silicone encapsulated LED products. Failure to comply might lead to damage and premature failure of the LED. 1. Handle the component along the side surfaces by using forceps or appropriate tools. 2. Do not directly touch or handle the silicone lens surface. It may damage the internal circuitry. SPEC NO: DSAL0882 DSAL0882 REV NO: V.1 APPROVED: WYNEC CHECKED: Allen Liu DATE: SEP/01/2010 SEP/01/2010 DRAWN: Y.H.Wu PAGE: 2 OF 7 ERP: 1201006293 Selection Guide Part No. Dice Viewing Angle [1] Iv (mcd) [2] @ 20mA Lens Type Min. AA4040QWS/D AA4040QWS/D White (InGaN) 21/2 450 Water Clear Typ. 600 120° Notes: 1. 1/2 is the angle from optical centerline where the luminous intensity is 1/2 of the optical peak value. 2. Luminous intensity/ luminous Flux: +/-15%. Electrical / Optical Characteristics at TA=25°C Symbol Parameter Device Typ. Max. Units Test Conditions VF [1] Forward Voltage White 3.3 4.0 V IF=20mA IR Reverse Current White 50 uA VR = 5V pF VF=0V;f=1MHz x [2] 0.31 Chromaticity Coordinates White y [2] C 0.31 Capacitance White 100 Notes: 1. Forward Voltage: +/-0.1V. 2: Measurement Tolerance Of The Chromaticity Coordinates Is ±0.01. Absolute Maximum Ratings at TA=25°C Parameter White Units Power dissipation 120 mW DC Forward Current 30 mA Peak Forward Current [1] 150 mA 5 V Reverse Voltage Operating Temperature -40°C To +85°C Storage Temperature -40°C To +85°C Note: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. SPEC NO: DSAL0882 DSAL0882 REV NO: V.1 APPROVED: WYNEC CHECKED: Allen Liu DATE: SEP/01/2010 SEP/01/2010 DRAWN: Y.H.Wu PAGE: 3 OF 7 ERP: 1201006293 White AA4040QWS/D AA4040QWS/D SPEC NO: DSAL0882 DSAL0882 REV NO: V.1 APPROVED: WYNEC CHECKED: Allen Liu DATE: SEP/01/2010 SEP/01/2010 DRAWN: Y.H.Wu PAGE: 4 OF 7 ERP: 1201006293 White AA4040QWS/D AA4040QWS/D White CIE 0.40 c0 0.35 y b1 0.30 b2 a0 0.25 a2 0.20 0.20 0.25 0.30 0.35 0.40 x x y x y 0.213 0.282 0.245 0.298 0.271 0.282 0.245 0.298 0.271 0.313 0.296 0.265 0.265 0.286 0.299 0.306 0.332 0.242 0.226 0.265 0.265 0.286 0.299 0.313 0.296 0.329 0.325 0.329 0.325 0.358 0.372 0.329 0.371 0.363 0.400 0.306 b1 x 0.263 a2 y 0.332 0.329 0.371 a0 c0 b2 Notes: Shipment may contain more than one chromaticity regions. Orders for single chromaticity region are generally not accepted. Measurement tolerance of the chromaticity coordinates is ±0.01. SPEC NO: DSAL0882 DSAL0882 REV NO: V.1 APPROVED: WYNEC CHECKED: Allen Liu DATE: SEP/01/2010 SEP/01/2010 DRAWN: Y.H.Wu PAGE: 5 OF 7 ERP: 1201006293 AA4040QWS/D AA4040QWS/D Reflow soldering is recommended and the soldering profile is shown below. Other soldering methods are not recommended as they might cause damage to the product. Recommended Soldering Pattern (Units : mm; Tolerance: ± 0.1) Reel Dimension Tape Dimensions (Units : mm) SPEC NO: DSAL0882 DSAL0882 REV NO: V.1 APPROVED: WYNEC CHECKED: Allen Liu DATE: SEP/01/2010 SEP/01/2010 DRAWN: Y.H.Wu PAGE: 6 OF 7 ERP: 1201006293 PACKING & LABEL SPECIFICATIONS SPEC NO: DSAL0882 DSAL0882 REV NO: V.1 APPROVED: WYNEC CHECKED: Allen Liu AA4040QWS/D AA4040QWS/D DATE: SEP/01/2010 SEP/01/2010 DRAWN: Y.H.Wu PAGE: 7 OF 7 ERP: 1201006293